Horizontal - 1" Shaft

Annovi Reverberi / AR North America RRV D Version with F24 flange series pumps are designed to direct drive on gasoline engines ranging from 8 – 13.0 h.p. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RRV is a result of our combined 60 years of pumps building experience and expertise

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 3,600 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 9.82 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 13.35 oz
• Weight: 18.0 lb.

This Annovi Reverberi / AR North America RSV series pumps are designed to direct drive on gasoline engines ranging from 8 – 13 h.p. Intended use for medium to heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 500 hours at maximum performance. The RSV is a result of our combined 60 years of pumps building experience and expertise

Features
• Features a compact and efficient intergraded unloader valve and fixed chemical injector
• Thermal relief valve included at no cost
• Forged brass head & valve covers
• Ceramic coated stainless steel plungers
• Direct drive with 4 bolt gas mounting flange

Specifications
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 12.73 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Port: 3/8" FPT
• Outlet Port: 3/8" Male NPT
• Oil capacity: 16 oz
• Weight: 14.0 lb.

Comet ZWD-K 3535G Pump with Built-In Unloader and Chemical Injector. This 3, 500 PSI & 3.4 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP

Features
• Built-In adjustable unloader with chemical injector
• 1/2” FPT Inlet – 3/8” Outlet
• Reversible Crankshaft for Easy Right or Left Hand Mounting
• Increased Fin Depth Increases Surface Area to Maximize Heat Dissipation
• Stainless Steel Unitized Check Valves
• Heat-Resistant Solid Ceramic Plungers Operating on Lubricated Packings
• Direct Drive Gas Engine Mounting Flange (SAE J609B)
• Reinforced Crankcase for Increased Load Capacity
• Enlarged Crankcase Increases Oil Capacity for Better Lubrication and Lower Operating Temperatures
• One-Piece Industrial-Grade Oversized Bronze Connecting Rods

Specifications
• Max. Volume: 3.4 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 10.82 GHP
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" Male NPT
• Oil capacity: 14 oz
• Weight: 19.5 lb.

 

General EZ4040G 4000PSI, 4.0GPM Pump is designed to direct drive on gasoline engines ranging from 9 -13 HP

Features:
• Standard SAE J609 gasoline mounting flange for up to 13 hp engines
• Forged brass manifold with an exclusive lifetime warranty and 3:1 hydrostatic rating
• Die-cast, anodized aluminum oil-bath crankcase
• Innovative one-piece plunger design to eliminate water entering crankcase
• Premium roller bearing
• 5% reduction in crankcase load compared to standard 3,000 PSI, 15 mm pumps
• Unitized stainless steel inlet and discharge valves

Specifications:
• Triplex Plunger Pump
• Direct Drive with Gas Flange 9.0-13.0 HP SAE
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.54 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8-19 BSPP-F
• Drive Side: Standard right
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 20.0 lb.

Annovi Reverberi / AR North America RRV D Version with F24 flange series pumps are designed to direct drive on gasoline engines ranging from 8 – 13.0 h.p. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RRV is a result of our combined 60 years of pumps building experience and expertise

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 3,600 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 11.45 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 13.35 oz
• Weight: 18.0 lb.

Annovi Reverberi / AR North America RRV D Version with F24 flange series pumps are designed to direct drive on gasoline engines ranging from 8 – 13.0 h.p. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RRV is a result of our combined 60 years of pumps building experience and expertise

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.55 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 13.35 oz
• Weight: 18.0 lb.

This Annovi Reverberi / AR North America RSV4G40HDF40EZ / RSV4G40HD-F40EZseries pumps are designed to direct drive on gasoline engines ranging from 5 – 13 h.p. Intended use for medium to heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 500 hours at maximum performance of 4 gpm at 4,000 psi. The RSV is a result of our combined 60 years of pumps building experience and expertise

Features
• Triplex pump with Easy Start is smooth starting
• Features a compact and efficient intergraded unloader valve and fixed chemical injector
• Thermal relief valve included at no cost
• Built In easy start valve
• Forged brass head & valve covers
• Ceramic coated stainless steel plungers
• Direct drive with 4 bolt gas mounting flange

Specifications
• AR number on pump head RSV 4G40B
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 13.75 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Port: 3/8" FPT
• Outlet Port: 3/8" Male NPT
• Oil capacity: 16 oz
• Replaces RSV4G40B
• Weight: 14.0 lb.

 

• Triplex Plunger Pump
• Direct Drive with Gas Flange 7-11 HP SAE
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Maximum Horsepower Requirements: 8.2 GHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 19.0 lb.

This Annovi Reverberi / AR North America RSV series pumps are designed to direct drive on gasoline engines ranging from 8 – 13 h.p. Intended use for medium to heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 500 hours at maximum performance. The RSV is a result of our combined 60 years of pumps building experience and expertise

Features
• Features a compact and efficient intergraded unloader valve and fixed chemical injector
• Thermal relief valve included at no cost
• Forged brass head & valve covers
• Ceramic coated stainless steel plungers
• Direct drive with 4 bolt gas mounting flange

Specifications
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 3,400 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 9.3 GHP
• Max. Fluid Temp.: 140° F.
• Inlet Port: 3/8" FPT
• Outlet Port: 3/8" Male NPT
• Oil capacity: 16 oz
• Weight: 14.0 lb.

Comet ZWD4040G Industrial Duty Pump. This ZWD 4040G 4,000 PSI & 4.0 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP

Features
• Reversible Crankshaft for Easy Right or Left Hand Mounting
• Increased Fin Depth Increases Surface Area to Maximize Heat Dissipation
• Stainless Steel Unitized Check Valves
• Heat-Resistant Solid Ceramic Plungers Operating on Lubricated Packings
• Direct Drive Gas Engine Mounting Flange (SAE J609B)
• Reinforced Crankcase for Increased Load Capacity
• Enlarged Crankcase Increases Oil Capacity for Better Lubrication and Lower Operating Temperatures
• One-Piece Industrial-Grade Oversized Bronze Connecting Rods

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. We do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.5 GHP
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" FPT
• Oil capacity: 14 oz
• Replaces Comet # 6305.0900.00
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 17.5 lb.

Annovi Reverberi / AR North America RRV 4G40-VRT-PKG pump with VRT3 EZ start unloader, 1/2” bypass hose, thermal valve, 3/8” qc socket, 3/8” qc plug and garden hose inlet connector. RRV D Version with F24 flange series pumps are designed to direct drive on gasoline engines ranging from 8 -13 HP. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RRV is a result of our combined 60 years of pumps building experience and expertise

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.55 GHP
• Max. Fluid Temp.: 140° F.
• Oil capacity: 13.35 oz
• Unloader Inlet: 3/4" GH (garden hose)
• Unloader Outlet: 3/8" Female
• Weight: 21.10 lb.

Package Components:
• RRV4G40D-F24 pump
• VRT3-310 EZ Start adjustable pressure unloader
• 1/2” Black bypass hose
• Thermal relief valve
• Brass Line Strainer w/ Cone Filter, GH Inlet
• 3/8” QC brass socket
• 3/8” QC steel plug
• Weight: 21.10 lb

 

Comet ZWD4040G Industrial Duty Pump Fully Plumbed with EZ Start Unloader, Chemical Injector & Thermal Valve. This ZWD 4040G 4,000 PSI & 4.0 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP.

Features
• Reversible Crankshaft for Easy Right or Left Hand Mounting
• Increased Fin Depth Increases Surface Area to Maximize Heat Dissipation
• Stainless Steel Unitized Check Valves
• Heat-Resistant Solid Ceramic Plungers Operating on Lubricated Packings
• Direct Drive Gas Engine Mounting Flange (SAE J609B)
• Reinforced Crankcase for Increased Load Capacity
• Enlarged Crankcase Increases Oil Capacity for Better Lubrication and Lower Operating Temperatures
• One-Piece Industrial-Grade Oversized Bronze Connecting Rods

Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.5 GHP
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" FPT
• Oil capacity: 14 oz

Componets
• VRT3-310 Adjustable easy start pressure unloader
• Clear bowl water Inlet Filter 3/4 FGH
• Adjustable chemical injector with hose & filter
• Thermal relief valve protects pump from overheating
• 3/8” Brass QC socket
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 23 lb

Annovi Reverberi / AR North America RRV 4G40-PKG pump with bolt-on unloader, chemical injector, thermal valve and garden hose inlet connector. RRV D Version with F24 flange series pumps are designed to direct drive on gasoline engines ranging from 8 -13 HP. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RRV is a result of our combined 60 years of pumps building experience and expertise

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.55 GHP
• Max. Fluid Temp.: 140° F.
• Oil capacity: 13.35 oz
• Unloader Inlet: 3/4" GH (garden hose)
• Unloader Outlet: 3/8" Male
• Weight: 20.10 lb.

Package Components:
• RRV4G40D-F24 pump
• VR35 Adjustable unloader with adjustable chemical injector
• Thermal relief valve
• Garden hose inlet connector with cone filter

 

• Triplex Plunger Pump
• Replaces XMV3.5G30D-F24 & XMV3.5G25D-F24
• Direct Drive with Gas Flange 7-11 HP SAE
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Maximum Horsepower Requirements: 12.73 GHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 16.0 lb.

• Triplex Plunger Pump
• Replaces XMV4G30D-F24 & XMV4G32D-F24
• Direct Drive with Gas Flange 7-11 HP SAE
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Maximum Horsepower Requirements: 14.5 GHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 16.0 lb.

4,000 PSI 4.0 GPM General EP1313G8 Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:
• General EP1313G8 Pump with SAE J609 Gas Flange
• Direct Drive with Gas Flange 9.0-13.0 HP SAE
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.5 GHP
• Max. Fluid Temp.: 165º F
• New Forged brass manifold , increases working pressure to 4,000 PSI
• Solid ceramic plungers with dual guide system

COMPONENTS:
• General EP1313G8 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket and 3/8” QC Plug Included
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 19.90 lb

3,045 PSI 3.4 GPM General EP1508G8 Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:
• General EP1508G8 Pump with SAE J609 Gas Flange
• Direct Drive with Gas Flange 9.0-13.0 HP SAE
• Max. Volume: 3.4 GPM
• Max. Discharge Pressure: 3,045 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 10.6 GHP
• Max. Fluid Temp.: 165º F
• New Forged brass manifold , increases working pressure to 4,000 PSI
• Solid ceramic plungers with dual guide system

COMPONENTS:
• General EP1508G8 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket Installed and 3/8” QC Plug Included
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 19.90 lb

Comet AWD 4030 G-K 3,000 PSI 4.0 GPM Commercial Duty triplex plunger pump with adjustable unloader & chemical injection

Features:
• Direct Drive Gas Engine Mounting Flange (SAE J609B)
• Built-In Uni-flow Unloader
• Fixed Chemical Injector
• Double Seal Packings (High & Low)
• Stainless Steel Check Valves
• Forged Brass Manifold
• Ceramic Plungers
• Anodized Crankcase

Specifications:
• Flow Rate: 4.0 GPM
• Max. Pressure: 3,000 PSI
• Shaft Size (Diameter): Ø 1"
• Shaft Style: Hollow Shaft - Gas Engines
• RPMs: 3,400
• Max. Horsepower Requirements: 10.9 GHP
• Inlet Connection: 1/2" FNPT
• Outlet Connection: 3/8" MNPT
• Pump Head: Brass
• Built-In Unloader: Yes
• Oil Capacity: 10 fl oz
• Weight: 14.4 lbs

Comet EWD-K 4042G, EWD 4042 G-K Pump with Built-In Unloader, chemical injector, thermal valve and garden hose inlet connector. This 4, 200 PSI & 4.0 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP

Features
• Built-In adjustable unloader with chemical injector
• 1” Hollow Shaft with SAE J609B flange for coupling to gas engines
• High-strength Brass Pump Head
• New designed reversible carter made in special aluminum alloy
• Stainless –steel hardened piston guides
• Special plugs for dust protection
• O- ring and labyrinth oil seal system between crankcase and rear cover, to reduce oil splashing
• Wide oil level viewer
• Special aluminum alloy conrods made in a single piece
• Top-quality and oversized ball-needle bearings to ensure long durability
• Highly efficient stainless steel check valves with removable plugs for easy inspection
• Solid ceramic plungers, high corrosion and abrasion-proof
• High performance double sealing system

Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,200 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 15.27 GHP

COMPONENTS:
• Comet EWD-K 4042G Triplex Plunger Pump
• Thermal relief valve
• 3/4” Garden Hose Inlet Fitting
• 3/8” QC brass socket
• Mounting bolts
• Chemical injector hose and filter
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Replaces Comet # 6311.0150.10 & 6311.0162.10
• Weight: 16.10 lb

strong>
• Built-In adjustable unloader with chemical injector
• 1” Hollow Shaft with SAE J609B flange for coupling to gas engines
• High-strength Brass Pump Head
• New designed reversible carter made in special aluminum alloy
• Stainless –steel hardened piston guides
• Special plugs for dust protection
• O- ring and labyrinth oil seal system between crankcase and rear cover, to reduce oil splashing
• Wide oil level viewer
• Special aluminum alloy conrods made in a single piece
• Top-quality and oversized ball-needle bearings to ensure long durability
• Highly efficient stainless steel check valves with removable plugs for easy inspection
• Solid ceramic plungers, high corrosion and abrasion-proof
• High performance double sealing system

Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,200 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 15.27 GHP

COMPONENTS:
• Comet EWD-K 4042G Triplex Plunger Pump
• Thermal relief valve
• 3/4” Garden Hose Inlet Fitting
• 3/8” QC brass socket
• Mounting bolts
• Chemical injector hose and filter
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 16.10 lb

Comet ZWD-K 4040G, ZWD 4040 G-K Pump with Built-In Unloader, Chemical Injector and Easy Start. This 4, 000 PSI & 4.0 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP

Features
• Built-In adjustable unloader with chemical injector
• Built-In easy start
• Increased Fin Depth Increases Surface Area to Maximize Heat Dissipation
• Stainless Steel Unitized Check Valves
• Heat-Resistant Solid Ceramic Plungers Operating on Lubricated Packings
• Direct Drive Gas Engine Mounting Flange (SAE J609B)
• Reinforced Crankcase for Increased Load Capacity
• Enlarged Crankcase Increases Oil Capacity for Better Lubrication and Lower Operating Temperatures
• One-Piece Industrial-Grade Oversized Bronze Connecting Rods

Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.54 GHP
• Inlet Port: 3/4" GH (garden hose)
• Outlet Port: 3/8" Male NPT
• Oil capacity: 14 oz
• Weight: 19.5 lb.