High Temp Pumps

Comet LWS 3525 S 2,500 PSI 3.5 GPM Industrial Duty /Carpet Cleaning Triplex 24mm Solid Shaft Plunger Pump (Includes Hot Water Seals)

Features:
• Forged Bronze Connecting Rods with Lifetime Warranty
• Hardened Stainless Steel Piston Guides
• High Efficiency Stainless Steel Check Valves
• Abrasion Proof, Heat Resistant, Industrial Ceramic Plungers
• High Quality Buna-Textile Double-Sealing V-Packings
• Die-Cast, Anodized Aluminum Crankshaft-Fin Design for Optimal Operating Temperature
• High Quality Oversized Ball Bearings
• Optimal Oil Bath for High Speed Operation
• Designed For Belt Drive, Gearbox or Flex Couplers
• Hot water Seals Installed

Specifications:
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: Ø 24mm
• Shaft Style: Solid Shaft
• Maximum Horsepower Requirements: 7.95 GHP/ 5.9 EHP
• Inlet Connection: 1/2" FNPT
• Outlet Connection:3/8" FNPT
• Pump Head: Brass or Stainless Steel
• Oil Capacity: 11 fl oz
• LWS 3525 S pump (6301.1201.00) with hot water seals
• Comet Revised # 31001-00053
• Weight: 13.4 lb.

General EPHT18132S Triplex EPHT Series 1,750 RPM Solid Shaft Plunger Pump with High-temp Seals.

Features:
• Features patented “high tech” packings:
    -dynamic low-pressure seal retainer
    -superior low-pressure seal
    -innovative intermediate ring
    -superior high-pressure seal
• Nickel-plated manifold
• New forged brass manifold , increases working pressure to 4,000 PSI
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal

Specifications Sheet

Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.4 GPM
• Max. Discharge Pressure: 2,465 PSI
• Horsepower: 5.7 EBHP
• Max. Pump Speed: 1,750 RPM
• Oil Capacity: 14 oz
• Max. Fluid Temp.: 185 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Rail kit part # ZFEETEVO
• Replaces HTXS1813S
• Weight: 18.0 lb.

Comet SWS 4040 S Triplex Plunger Hot Water Pump with Kevlar Seals. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Brass Head
• Reversible Crankcase for Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring Under the Seal
• Solid Brass Manifolds
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• Highly Quality Tapered Roller Bearings
• Optimal Oil Bath for High Speed Operation
• 24mm Solid Shaft for Belt Drive, Gearbox or Flex Couplers
• Hot Water Pump with Kevlar Seals

Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max Temperature: 185° F
• Inlet Ports: 1/2" FBSP
• Outlet Ports: 3/8" FBSP
• Replaces Comet # 6516.0101.00
• Weight: 40.0 lb.

Annovi Reverberi 185º Hot Water Triplex Plunger Pump. Designed for a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems
 

Features:
• Manifold: Nickel plated forged brass.
• Plungers: Special thick solid ceramic for long life, strong durability and more resilience.
• Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side.
• Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation.
• Valve, Seat and Springs: Stainless steel with specially designed ultra form material.
• Seals and V-Packing: 185º Viton high temperature machined.
• Plunger Rods: High strength stainless steel construction.
• Connecting Rods: One-piece bronze special alloy aluminum based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.

Specifications:
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 5.0 BHP
• Max. Fluid Temp.: 185º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 14.0 lb.

Annovi Reverberi 185º Hot Water Triplex Plunger Pump. Designed for a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• Manifold: Nickel plated forged brass.
• Plungers: Special thick solid ceramic for long life, strong durability and more resilience.
• Bearings: Oversized tapered roller bearing for maximum life and load disbursement.
• Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation.
• Valve, Seat and Springs: Stainless steel with specially designed ultra form material.
• Seals and V-Packing: 185º Viton high temperature machined.
• Plunger Rods: High strength stainless steel construction.
• Connecting Rods: One-piece bronze for higher pressure, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.

Specifications
• Max. Volume: 3.96 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 5.5 BHP
• Max. Fluid Temp.: 185º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

Comet Premium TW 8030S Series Triplex Plunger Hot Water Pump with Kevlar Seals. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Hot Water Pump with Kevlar Seals

Specifications
• Max. Volume: 8.7 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6513.1401.00
• Weight: 45.0 lb.

Comet Premium TW 11025S Series Triplex Plunger Hot Water Pump with Kevlar Seals. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Hot Water Pump with Kevlar Seals

Specifications
• Max. Volume: 11.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6513.1201.00
• Weight: 45.0 lb.

Comet Premium TW 8036S Series Triplex Plunger Hot Water Pump with Kevlar Seals. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Hot Water Pump with Kevlar Seals

Specifications
• Max. Volume: 8.6 GPM
• Max. Discharge Pressure: 3,600 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Replaces Comet # 6513.0902.00
• Weight: 45.0 lb.