General Pump

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 184C
• Max. Volume: 4.2 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 1 1/8” Hollow
• Max. Horsepower Requirements: 7.0 BHP
• Max. Fluid Temp.: 165º degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 18.5 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 184C
• Max. Volume: 3.6 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 1 1/8” Hollow
• Max. Horsepower Requirements: 6.0 BHP
• Max. Fluid Temp.: 165º degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 18.5 lb.

General EZ2555S 2500 PSI, 5.5 GPM Solid Shaft Pump for belt drive, flex coupling or gear reduction

Features:
• Solid ceramic plunger design
• Flex coupling and bell housing available for direct drive
• Forged brass manifold with 4:1 hydrostatic rating
• Die-cast, anodized aluminum, oil-bath crankcase
• Premium roller bearing
• Unitized stainless steel inlet and discharge valves
• Available in “L” left-handed versions

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications Sheet

Specifications:
• Triplex Plunger Pump
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 24MM Solid
• Max. Horsepower Requirements: 9.4 EBHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8-19 BSPP-F
• Drive Side: Standard right>
• Crankcase Oil Capacity: 14.0 oz
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 18.0 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 184C
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 1 1/8” Hollow
• Max. Horsepower Requirements: 9.4 EBHP
• Max. Fluid Temp.: 165º degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 18.5 lb.

General Pump DCFSCP24GZ 24" Hammerhead Professional Flat Surface Cleaner with Casters. The gun has a revolutionary compensating design to reduce fatigue. The cleaner glides easily across the surface uniformly cleaning pool decks, sidewalks, garage floors and more

FEATURES
• Compensating gun feature
• Full 24” cleaning path
• Heavy-duty anodized aluminum components
• Rugged ABS cover
• Swivel has grease zerk fitting for bearing lubrication
• Two Stainless Steel bearings for better performance
• Stainless Steel inlet filter for water filtration
• Supplied with 3-nozzle rotating arm
• 4 Casters

SPECIFICATIONS
• Max Flow: 8 GPM
• Operating Pressure: 1,000 – 4,000 PSI
• Max. Temp.: 180° F
• Nozzles: 925020M (3)
• Trigger Gun Inlet: 3/8" NPT-F
• Optimal performance if used with a 3 GPM or more pressure washer
• Dimensions-Retracted 70” x 25” x 25”
• Shipping Weight 26 lbs

General Pump Replacement 22mm-14 Twist Coupler O-Ring (EPDM)

Specifications
• Fits 22mm-14 twist coupler sockets from AR, Comet, General, MTM Hydro, PA and others
• Material: EPDM
• Max. Temperature: 250° F
• Color: Black

General Pump DCFSCS22Z 22" Hammerhead Professional Stainless Steel Flat Surface Cleaner with Casters. The gun has a revolutionary compensating design to reduce fatigue. The cleaner glides easily across the surface uniformly cleaning pool decks, sidewalks, garage floors and more

FEATURES
• Compensating gun feature
• Full 22” cleaning path
• Heavy-duty anodized aluminum components
• Rugged Stainless Steel cover, handle, and casters
• Swivel has grease zerk fitting for bearing lubrication
• Stainless Steel inlet filter for water filtration
• Supplied with 3-nozzle rotating arm

SPECIFICATIONS
• Max Flow: 8 GPM
• Operating Pressure: 1,000 – 4,000 PSI
• Max. Temp.: 180° F
• Nozzles: 925020M (3)
• Trigger Gun Inlet: 3/8" NPT-F
• Optimal performance if used with a 3 GPM or more pressure washer
• Dimensions-Retracted 70” x 23” x 23”
• Shipping Weight 28 lbs

General KE28HA Stainless Steel 2, 170 PSI 16.1 GPM Triplex Plunger Pump. A “New Generation” Pump

Features:
• Patent-pending, symmetrical power end design featuring top and bottom mounting holes allowing for easy left to right shaft conversion
• Low-high pressure packing design with integrated cooling system
• High volumetric efficiency suction/delivery valves featuring new spherical design of sealing areas
• Splash lubrication

Materials:
• High resistance light alloy die cast aluminum crankcase
• 420 Stainless steel manifold, nickel treated
• Taper roller bearings
• Special antifriction, forged, light alloy connecting rods
• Forged alloy steel crankshaft, hardened, tempered and nitrited
• Cast iron piston guide, nickel treated
• Solid ceramic plungers
• Stainless steel valves
• Pumps are also available with 316 SS packing components. These models use prefix “KEN”

Specifications:
• Maximum Inlet Pressure: 45 PSI
• Max. GPM: 16.1
• Max. PSI: 2,170
• Max. Fluid Temp.: 140° F.
• Inlet Port Thread: 1” NPT-F
• Discharge Port Thread: 1/2” NPT-F
• Shaft Diameter: 1.181”/30 mm
• Pump Dimensions: 15.2” x 13.4” x 7.7”
• Shipping Weight: 88.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 2,100 PSI
• Max. Pump Speed: 1150 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 11.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 32.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,100 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 6.5 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 30.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 1125 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 8.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 30.0 lb.

• Triplex Plunger Pump
• Direct Drive with Gas Flange 3.0-6.5 HP SAE
• Max. Volume: 3.50 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.5 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 3/8" BSP
• Discharge Ports (2): 1/4" BSP
• Drive Side: Standard right
• Forged brass head
• Solid ceramic plungers
• Weight: 11.4 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 3.50 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 5.0 BHP
• Max. Fluid Temp.: 165º degrees F.
• Inlet Ports (2): 3/8" BSP
• Discharge Ports (2): 1/4" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 11.5 lb.

• Triplex Plunger Pump
• Direct Drive with Gas Flange 3.0-6.5 HP SAE
• Max. Volume: 2.80 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 5.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 3/8" BSP
• Discharge Ports (2): 1/4" BSP
• Drive Side: Standard right
• Forged brass head
• Solid ceramic plungers
• Weight: 11.4 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.80 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 4.0 BHP
• Max. Fluid Temp.: 165º degrees F.
• Inlet Ports (2): 3/8" BSP
• Discharge Ports (2): 1/4" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 11.5 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.10 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 3.0 BHP
• Max. Fluid Temp.: 165º degrees F.
• Inlet Ports (2): 3/8" BSP
• Discharge Ports (2): 1/4" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 11.5 lb.

General Pump DCFSCP20GZ 20" Hammerhead Professional Flat Surface Cleaner. The gun has a revolutionary compensating design to reduce fatigue. The cleaner glides easily across the surface uniformly cleaning pool decks, sidewalks, garage floors and more

FEATURES
• Compensating gun feature
• Full 20” cleaning path
• Heavy-duty anodized aluminum components
• Rugged ABS cover
• Swivel has grease zerk fitting for bearing lubrication
• Two Stainless Steel bearings for better performance
• Stainless Steel inlet filter for water filtration
• Supplied with 2-nozzle rotating arm
• Note: Caster Kit Not Included (Optional Caster Kit: P/N 2100200 available)

SPECIFICATIONS
• Max Flow: 8 GPM
• Operating Pressure: 1,000 – 4,000 PSI
• Max. Temp.: 180° F
• Nozzles: 925020M (2)
• Trigger Gun Inlet: 3/8" NPT-F
• Dimensions-Retracted 70” x 21” x 21”
• Shipping Weight 24 lbs

General EP1813S17 Triplex EP Series 1,750 RPM Solid Shaft Plunger Pump.

Features:
• Triplex plunger pump
• New Forged brass manifold
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.2 GPM
• Max. Discharge Pressure: 2,900 PSI
• Horsepower: 8.3 HP
• Max. Pump Speed: 1,750 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 15 oz
• Max. Fluid Temp.: 165 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Replaces TX1813S17
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 15.4 lb.

General ET1506E34UTSL 2,610 PSI 2.9 GPM (Left Handed) Direct Drive Pump with Total Start-Stop flanged to direct couple on electric NEMA 56 C motors

Features:
• Total start-stop feature allows flow to activate electric motor
• Built-in unloader
• Nickel-plated cast manifold manufactured like heavy-duty pump line
• New generation seal package
• New dust protection chamber
• Solid ceramic plungers
• New oversized plunger guide
• New optimized inlet and outlet valves
• New oil seal
• Left side shaft, right side manifold

ET Series Spec Sheet

Specifications:
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,610 PSI
• Max. Horsepower Requirements: 5.2 EBHP
• Max. Pump Speed: 3,400 RPM
• Max. Fluid Temp.: 165º F
• Oil Capacity: 8.5 oz
• Inlet Port Thread: 1/2"-10 BSP-F
• Discharge Port Thread: 3/8"-13 BSP-F
• Shaft Diameter: 5/8” Hollow
• Dimensions – Nominal: 8" x 7.4" x 4.7"
• Weight: 11.0 lb

General ET1506E34 2,610 PSI 2.9 GPM (Left Handed) Direct Drive Pump flanged to direct couple on electric NEMA 56 C motors

Features:
• “HR” anti-corrosion surface treatment on manifold
• New generation seal package
• Dust protection chamber
• Solid ceramic plungers
• Oversized plunger guide
• Optimized inlet and outlet valves
• Oversized crankcase Hollow shaft, flanged for direct couple to electric motors (NEMA56C)

Specifications:
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,610 PSI
• Max. Horsepower Requirements: 5.2 EBHP
• Max. Pump Speed: 3,400 RPM
• Max. Fluid Temp.: 165º F
• Oil Capacity: 8.5 oz
• Inlet Port Thread: 1/2"-14 BSP-F
• Discharge Port Thread: 3/8"-19 BSP-F
• Shaft Diameter: 5/8” Hollow
• Dimensions – Nominal: 7.3" x 7.4" x 5.5"
• Weight: 11.0 lb