12 V Diaphragm Pumps

Everflo EFRV3000 12 Volt RV Fresh Water Diaphragm Pump. If you are looking for an upgrade or replacement, look no further than our 12 volt on-demand RV fresh water pump. Designed for use in a variety of water delivery applications, including plumbing systems, we've got you covered no matter your need

Features:
• Inline Fuse Protection for Increased Reliability & Safety
• Automatically Turns Off When No Flow is Required
• Patented DXS-3® Valves and Santoprene™ Diaphragm
• Polypropylene Head with NPSM Ports (1/2”)
• Includes Inline Strainer & Additional Fittings for Adaptable Connections
• Self-Priming to 10'
• CE, NSF ANSI 61 and CSA Approved

Everflo RV Pump Sell Sheet

Specifications:
• Max. Flow: 3.0 GPM
• Max. Pressure: 55 PSI
• Max. Fluid Temperature: 130° F
• Voltage: 12 VDC
• Max. Amps: 9.5
• Inlet/Outlet Ports: 1/2” NPS Male
• Includes: Two 1/2″ NPS HB Fittings & 1/2″ NPS Inline Strainer
• Owner’s manual and colored box
• Pump Dry Weight: 5.5 lbs

Everflo EF4000 Diaphragm Pump. Demand Switch – Operates only when liquid flow is required. Replacement for agricultural sprayers and fluid transfer applications.

Features:
• Polypropylene pump housing and valve plate
• Viton® Valves – Santoprene® Diaphragm
• Zinc Plated Steel fasteners
• Painted Steel 3” Motor Shelll
• Honeywell™ Micro Switch
• Round-Up® Ready
• Self Priming up to 8’ above fluid level

Specifications:
• Demand Switch – Operates only when liquid flow is required
• Max. Flow: 4.0 GPM
• Max. Pressure: 60 PSI
• Max. Fluid Temperature: 140° F
• Voltage: 12 VDC
• Max. Amps: 13.0
• Inlet/Outlet Ports: 1/2” Female NPT
• Inline fuse protection
• Wire leads with 2-pin connector
• Owner’s manual and colored box
• CE Approved*
• Pump Dry Weight: 5.6 lbs

Delavan SmartFLO™ Series 3120-423F-SB 2.0 GPM 85-100 PSI Diaphragm Demand-Bypass Pump with On/Off Switch, 3/8” Female Threaded Ports. SmartFLO™ technology automatically adapts flow rates to provide optimal performance in any application. Harmful rapid switch cycling is completely eliminated to extend pump life with no additional setup required

SmartFLO™:
• Combines the advantages of both Bypass and Demand Controls
• Utilizes Pressure Sensing Demand Switch AND Internal Bypass Valve
• Automatically adapts to changing system demands
• Constant and instant flow eliminates pump cycling
• Will turn off when not in use and outlets are closed
• Low chance of overheating when run for long periods

Fits All Applications:
• RV and Marine systems
• Small to medium size sprayers
• Multi-outlet systems

Features:
• 100% Factory tested
• Self-Priming
• Can be run dry
• High Torque Motor for superior flow at pressure
• On/Off switch at base of pump
• 2 Year warranty from date of purchase

SmartFLO Pump Model 3222-421F-SB Video

Specifications:
• Pump Type: Bypass - Demand, 3-chamber positive displacement
• Flow: Up to 2.0 GPM
• Valves: Viton
• Diaphragm: Santoprene
• Power: 12VDC
• Leads: 12 AWG, 6” long with 2-pin molded connector
• Amps: 8.5 Max
• Pressure Settings: 85-100 PSI
• Inlet/Outlet Ports: 3/8” FPT
• Packaging: Small box
• Weight: 5.6 lbs

Delavan PowerFLO™ 5850 Series 5.0 GPM 45 PSI Diaphragm Pump. Demand Switch – Operates only when liquid flow is required.

Features:
• Certified to NSF/ANSI Standard 61 & 372
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 6” long with 2-pin connector
• Amps: 6.0 – 16
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Viton
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

NSF/ANSI Certified:
• NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
• NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 5-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Max. Flow: 5.0 GPM
• Pressure Shut-Off: 45 PSI
• Inlet/Outlet Ports: 1/2” FNPT
• Packaging: Small box
• Weight: 6.0 lbs

Delavan PowerFLO™ 5850 Series 5.0 GPM 60 PSI Diaphragm Pump. Demand Switch – Operates only when liquid flow is required.

Features:
• Certified to NSF/ANSI Standard 61 & 372
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 6” long with 2-pin connector
• Amps: 6.0 – 16.3
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Viton
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

NSF/ANSI Certified:
• NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
• NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 5-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Max. Flow: 5.0 GPM
• Pressure Shut-Off: 60 PSI
• Inlet/Outlet Ports: 1/2” FNPT
• Replaces 5850-101E
• Packaging: Small box
• Weight: 6.0 lbs

Delavan PowerFLO™ 5950 Series 5.0 GPM 60 PSI Diaphragm Pump with 3/4” Quick Attach Ports. Demand Switch – Operates only when liquid flow is required.

Features:
• Certified to NSF/ANSI Standard 61 & 372
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 6” long with 2-pin connector
• Amps: 16.0 Max
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Viton
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

NSF/ANSI Certified:
• NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
• NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 5-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Max. Flow: 5.0 GPM
• Pressure Shut-Off: 60 PSI
• Inlet/Outlet Ports: 3/4” Quick Attach
• Packaging: Small box
• Weight: 6.0 lbs

Everflo EFRV5000 12 Volt RV Fresh Water Diaphragm Pump. If you are looking for an upgrade or replacement, look no further than our 12 volt on-demand RV fresh water pump. Designed for use in a variety of water delivery applications, including plumbing systems, we've got you covered no matter your need

Features:
• Inline Fuse Protection for Increased Reliability & Safety
• Automatically Turns Off When No Flow is Required
• Patented DXS-3® Valves and Santoprene™ Diaphragm
• Polypropylene Head with NPSM Ports (1/2”)
• Includes Inline Strainer & Additional Fittings for Adaptable Connections
• Self-Priming to 10'
• CE, NSF ANSI 61 and CSA Approved

Everflo RV Pump Sell Sheet

Specifications:
• Max. Flow: 5.0 GPM
• Max. Pressure: 55 PSI
• Max. Fluid Temperature: 130° F
• Voltage: 12 VDC
• Max. Amps: 16.0
• Inlet/Outlet Ports: 1/2” NPS Male
• Includes: Two 1/2″ NPS HB Fittings & 1/2″ NPS Inline Strainer
• Owner’s manual and colored box
• Pump Dry Weight: 6.0 lbs

Fimco HFP-45060-113 (5281372, 5151088) HIGH-FLO High Performance 4.5 GPM 60 PSI 12 Volt Diaphragm Pump. Replacement pump for spot sprayers, liquid fertilizer units, recreational activities, wash down or liquid transfer. High-Flo has designed a new level of demand pump. Engineered to strict tolerances and elevated standards which deliver the peak of efficiency, the new High Performance line of pumps from Fimco High-Flo represent the latest in pump technology. Replaces & Upgrades Fimco Pump #5275088

Features:
• Increased Flow Rates
• Increased Motor Life
• Optimized Chamber Flow
• Improved Check Valves
• Chemical resistant elastomers
• Fan Cooled Motor
• Self priming – Up to 14‘
• Runs dry without damage
• 100% Factory tested
• Roundup® ready

Specifications:
• Automatic demand diaphragm pump
• 12 Volt DC power
• 4.5 GPM max. flow
• 60 PSI pressure switch
• Viton Valves
• Santoprene Diaphragm
• In-Line 15 AMP fuse protection – 14 AMP max draw
• Quick attach port connection with 1/2” MNPT & 1/2” Hose Barb fittings
• Fimco Box #: 5151088
• Fimco Model #: HFP-45060-113
• Fimco Pump #: 5281372
• Replaces Fimco #'s 5277982, 5275088 , 5275704, 5275498, 5275017
• 2 Year consumer limited warranty
• 90 Day commercial limited warranty
• Do not use for bleach or petroleum products
• Weight: 5.50 lbs

Fimco 5281372/5151088 Pump Breakdown

Delavan PowerFLO™ 5836 Series 3.6 GPM 60 PSI Diaphragm Pump. Bypass Design – Continuous operation

Features:
• Certified to NSF/ANSI Standard 61 & 372
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 12” long with Delphi Weatherproof Electrical 2 Pin Connector
• Amps: 11 Max
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Viton
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

NSF/ANSI Certified:
• NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
• NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act

Manufacturer Recommendation:
• If you are going to be running continuous use with any bypass model of pump, Delavan also recommends that you purchase a heat sink for the motor

Pump:
• Bypass Design – Continuous operation
• Type: 5-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Max. Flow: 3.6 GPM
• Max Pressure: 60 PSI
• Pressure Settings: 70 PSI
• Inlet/Outlet Ports: 1/2” FNPT
• Packaging: Small box
• Weight: 7.0 lbs

Delavan PowerFLO™ 5840 Series 4.0 GPM 60 PSI Diaphragm Pump. Bypass Design – Continuous operation

Features:
• Certified to NSF/ANSI Standard 61 & 372
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 12” long with Delphi Weatherproof Electrical 2 Pin Connector
• Amps: 11 Max
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Viton
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

NSF/ANSI Certified:
• NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
• NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act

Manufacturer Recommendation:
• If you are going to be running continuous use with any bypass model of pump, Delavan also recommends that you purchase a heat sink for the motor

Pump:
• Bypass Design – Continuous operation
• Type: 5-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Max. Flow: 4.0 GPM
• Max Pressure: 60 PSI
• Pressure Settings: 70 PSI
• Inlet/Outlet Ports: 1/2” FNPT
• Packaging: Small box
• Weight: 7.0 lbs

Delavan PowerFLO™ 5850 Series 5.0 GPM 60 PSI Diaphragm Pump. Bypass Design – Continuous operation

Features:
• Certified to NSF/ANSI Standard 61 & 372
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 12” long with Delphi Weatherproof Electrical 2 Pin Connector
• Amps: 20 Max
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Viton
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

NSF/ANSI Certified:
• NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
• NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act

Manufacturer Recommendation:
• If you are going to be running continuous use with any bypass model of pump, Delavan also recommends that you purchase a heat sink for the motor

Pump:
• Bypass Design – Continuous operation
• Type: 5-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Max. Flow: 5.0 GPM
• Max Pressure: 60 PSI
• Pressure Settings: 70 PSI
• Inlet/Outlet Ports: 1/2” FNPT
• Packaging: Small box
• Weight: 7.0 lbs

Delavan PowerFLO™ 5850 Extreme Duty Series 5.0 GPM 45 PSI Diaphragm Pump. The 5850ED five chamber pump features Extreme Duty Geolast® diaphragms that have extended life when pumping chemicals with petroleum products. Demand Switch – Operates only when liquid flow is required.

Features:
• Geaolast® diaphragm installed ensuring longer pump life when spraying harsh chemicals
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 6” long with 2-pin connector
• Max Amps: 16
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Viton
• Diaphragm: Geolast®
• Fasteners: Stainless Steel

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 5-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Max. Flow: 5.0 GPM
• Pressure Shut-Off: 45 PSI
• Inlet/Outlet Ports: 1/2” FNPT
• Packaging: Small box
• Weight: 6.0 lbs

Everflo EF5500 Diaphragm Pump. Demand Switch – Operates only when liquid flow is required. Replacement for agricultural sprayers and fluid transfer applications.

Features:
• Polypropylene pump housing and valve plate
• Viton® Valves – Santoprene® Diaphragm
• Zinc Plated Steel fasteners
• Painted Steel 3” Motor Shelll
• Honeywell™ Micro Switch
• Round-Up® Ready
• Self Priming up to 8’ above fluid level

Specifications:
• Demand Switch – Operates only when liquid flow is required
• Max. Flow: 5.5 GPM
• Max. Pressure: 60 PSI
• Max. Fluid Temperature: 140° F
• Voltage: 12 VDC
• Max. Amps: 17.0
• Inlet/Outlet Ports: 1/2” Female NPT
• Inline fuse protection
• Wire leads with 2-pin connector
• Owner’s manual and colored box
• CE Approved*
• Pump Dry Weight: 5.6 lbs

Fimco High-Flo Pro Series 2.2 GPM 100 PSI 12 Volt Diaphragm Pump. Professional grade pump with upgraded elastomers is ideal for use with harsh chemicals and oil-based chemicals with surfactants

Features:
• High-Flo 12 Volt Pro Series Pump; 2.2 GPM
• Professional Grade Pump - Upgraded Elastomers
• Geolast® Diaphragm
• Heavy Duty Motor

Specifications:
• Voltage: 12 VDC 12 AMPS Max
• Max Flow: 2.2 GPM
• Switch Off Pressure: 100 PSI
• Recommended Slow Blow Fuse: 15 AMP
• Diaphragm: Geolast®
• Check Valve: Viton
• 1/2”-14 NPT Male Threads
• Two Pin Connector: 6” Long
• Includes Retrofit Kit
• Fimco Box #: 5281325
• Fimco Model #: HFP-2.2
• Fimco Pump #: 5151075
• DO NOT USE With Flammable Or Combustible Liquids
• Packaging: Small box
• Weighs 5.3 lbs

Delavan PowerFLO™ 5950 Series 5.0 GPM 60 PSI Diaphragm Pump with & 3/4” Quick Attach Ports. Bypass Design – Continuous operation

Features:
• Certified to NSF/ANSI Standard 61 & 372
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 12” long with Delphi Weatherproof Electrical 2 Pin Connector
• Amps: 20 Max
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Viton
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

NSF/ANSI Certified:
• NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
• NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act

Manufacturer Recommendation:
• If you are going to be running continuous use with any bypass model of pump, Delavan also recommends that you purchase a heat sink for the motor

Pump:
• Bypass Design – Continuous operation
• Type: 5-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Max. Flow: 5.0 GPM
• Max Pressure: 60 PSI
• Pressure Settings: 70 PSI
• Inlet/Outlet Ports: : 3/4” Quick Attach
• Weight: 6.0 lbs

Delavan PowerFLO™ 5950 Series 5.0 GPM 60 PSI Diaphragm Pump with Heat Sink & 3/4” Quick Attach Ports. Bypass Design – Continuous operation

Features:
• Certified to NSF/ANSI Standard 61 & 372
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 14 AWG, 12” long with Delphi Weatherproof Electrical 2 Pin Connector
• Amps: 20 Max
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene
• Valves: Viton
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

Heat Sink:
• Snap-fit heat sinks will reduce motor heat up to 30%
• Help to extend the available run time of the pump as well as increase motor life
• Heat sinks are made of extruded aluminum with a black anodized finish

NSF/ANSI Certified:
• NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
• NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act

Pump:
• Bypass Design – Continuous operation
• Type: 5-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Max. Flow: 5.0 GPM
• Max Pressure: 60 PSI
• Pressure Settings: 70 PSI
• Inlet/Outlet Ports: : 3/4” Quick Attach
• Weight: 7.6 lbs

Everflo EFSW5500-BOX Soft Wash (Bleach) Pump 12 V, 60 PSI, 5.5 GPM, QA Ports

Pump Features:
• Upgrade your system with the ground-breaking Everflo 12v On-Demand 5.5GPM Soft Wash Bleach Pump
• This pump was engineered and designed to handle bleach applications
• Featuring the exclusive Motor Shield that shuts the pump off if a leak is detected, protecting the motor and saving you money
• Save battery power with the automatic power switch that turns off pump when no flow is needed
• Easily self-prime up to 12 feet while having the ability to run dry without sustaining damage
• Additional features include corrosion resistant Viton valves and Santoprene™ diaphragm, polypropylene pump manifold with Quick Attach Ports
• CE approved & has standard mounting pattern for quick installation
• Supported by a 1-year consumer and 90 day commercial warranty.

Ideal Water Fluid Applications:
• This innovative 5.5GPM soft wash bleach pump is perfect for soft wash applications that require cleaning off black mold, algae, lichen, and mildew from outdoor surfaces such as rooftops, siding and sidewalks
• This bleach pump can also be used in disinfecting outdoor or indoor surfaces with effective bacteria or virus-killing bleach formulas

Includes Fittings:
• Fittings include, (1) QC x 3/4” Hose Barb Fitting and (1) QC x ½” MNPT Fitting
• For adaptable connections to plumbing system.

Specifications:
• Max. Flow: 5.5 GPM
• Max. Pressure: 60 PSI
• Max. Fluid Temperature: 140° F
• Voltage: 12 VDC
• Max. Amps: 17.0
• Inlet/Outlet Ports: Quick attach
• Packaging Style: Boxed
• Pump Dry Weight: 8.05 lbs

Fimco Industries VOLT EDGE™ 20V Lithium Ion Wireless Conversion Kit. The Volt Edge 20V Cordless Conversion Kit represents a major step in 21st Century Lithium Ion Battery powered technology. Designed to upgrade your traditional wired FIMCO sprayer by conveniently attaching to your current sprayer. Kit includes mounting saddle, a 20 Volt 5.0 Amp Hour Battery Pack, wireless receiver and remote. The conversion kit delivers up to 72 minutes of spraying and 100 gallons of liquid per charge. Innovation is everything and the Volt Edge Conversion Kit delivers the consistency, power and performance you need to get your work don

Features:
• 20 Volt Lithium Ion Battery provides on demand power when you need it most
• 20V Battery charging dock features easy to read display
• Universal polymer saddle fits most electric sprayer pumps (Check your mounting brackets to ensure fitment)
• Wireless remote gives you the flexibility to have control of your sprayer at your fingertips

Specifications:
• Warranty: 1 yr Consumer / 90 day Commercial
• Power Supply: Lithium Ion Battery
• Weight: 3.7 lbs

Delavan 7870-101E-SB PowerFLO™ FB2 Series 7.0 GPM 60 PSI Diaphragm Pump with 1/2” FNPT Ports. Demand Switch – Operates only when liquid flow is required.

Features:
• The FB2 pumps are heavy duty 12V, 7 GPM pumps with Santoprene diaphragms and Santoprene valves
• These FB2 5 chamber pumps are smooth running, and can run dry, and self-prime
• The pumps feature popular threaded NPTF ports, along with a heavy duty demand system to turn the pump off when not in use, saving pump life and saving energy
• The FB2 pumps are known for one of the highest flow rates in the 12V market
• The FB2 pumps are used in difficult applications such as roof cleaning, and de-icing
• Certified to NSF/ANSI Standard 61 & 372
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 12 AWG, 12” long
• Max Amps (60 PSI): 17
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene Glass Filled
• Valves: Santoprene
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

NSF/ANSI Certified:
• NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
• NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 5-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Max. Flow: 7.0 GPM
• Pressure Shut-Off: 60 PSI
• Inlet/Outlet Ports: 1/2” FNPT
• Packaging: Small box
• Weight: 9.75 lbs