Solid Shaft Pump 2,300-2,999

Comet LWS 3525 S 2,500 PSI 3.5 GPM Industrial Duty /Carpet Cleaning Triplex 24mm Solid Shaft Plunger Pump (Includes Hot Water Seals)

Features:
• Forged Bronze Connecting Rods with Lifetime Warranty
• Hardened Stainless Steel Piston Guides
• High Efficiency Stainless Steel Check Valves
• Abrasion Proof, Heat Resistant, Industrial Ceramic Plungers
• High Quality Buna-Textile Double-Sealing V-Packings
• Die-Cast, Anodized Aluminum Crankshaft-Fin Design for Optimal Operating Temperature
• High Quality Oversized Ball Bearings
• Optimal Oil Bath for High Speed Operation
• Designed For Belt Drive, Gearbox or Flex Couplers
• Hot water Seals Installed

Specifications:
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: Ø 24mm
• Shaft Style: Solid Shaft
• Maximum Horsepower Requirements: 7.95 GHP/ 5.9 EHP
• Inlet Connection: 1/2" FNPT
• Outlet Connection:3/8" FNPT
• Pump Head: Brass or Stainless Steel
• Oil Capacity: 11 fl oz
• LWS 3525 S pump (6301.1201.00) with hot water seals
• Weight: 13.4 lb.

Annovi Reverberi / AR North America RC N Version with 24mm solid shaft series pumps are designed to belt drive or gear drive on gas engines and belt drive or flange coupling on electric motors. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RC is a result of our combined 60 years of pumps building experience and expertise

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.4 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 5.8 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 10.0 lb.

Annovi Reverberi / AR North America RCA N Version with 24mm solid shaft series pumps are designed to belt drive or gear drive on gas engines and belt drive or flange coupling on electric motors. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCA is a result of our combined 60 years of pumps building experience and expertise

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 4.3 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 10.0 lb.

Annovi Reverberi / AR North America RCA N Version with 24mm solid shaft series pumps are designed to belt drive or gear drive on gas engines and belt drive or flange coupling on electric motors. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCA is a result of our combined 60 years of pumps building experience and expertise

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 6.0 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 10.0 lb.

Annovi Reverberi / AR North America RCA N Version with 24mm solid shaft series pumps are designed to belt drive or gear drive on gas engines and belt drive or flange coupling on electric motors. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCA is a result of our combined 60 years of pumps building experience and expertise

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 5.1 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 10.0 lb.

Annovi Reverberi / AR North America RC N Version with 24mm solid shaft series pumps are designed to belt drive or gear drive on gas engines and belt drive or flange coupling on electric motors. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RC is a result of our combined 60 years of pumps building experience and expertise

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.2 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 5.5 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 10.0 lb.

Annovi Reverberi / AR North America RCA N Left Handed Version with 24mm solid shaft series pumps are designed to belt drive or gear drive on gas engines and belt drive or flange coupling on electric motors. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCA is a result of our combined 60 years of pumps building experience and expertise

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Drive Side: Left
• Max. Horsepower Requirements: 6.0 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 10.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 5.0 BHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 14.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 5.0 BHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 14.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 5.5 BHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 14.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 6.0 BHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 13.4 lb.

Annovi Reverberi / AR North America RR N Version with 24mm solid shaft series pumps are designed to belt drive or gear drive on gas engines and belt drive or flange coupling on electric motors. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RR is a result of our combined 60 years of pumps building experience and expertise

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 2,900 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 7.9 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 13.35 oz
• Weight: 17.0 lb.

Annovi Reverberi / AR North America RR N Version with 24mm solid shaft series pumps are designed to belt drive or gear drive on gas engines and belt drive or flange coupling on electric motors. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RR is a result of our combined 60 years of pumps building experience and expertise

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 4.8 GPM
• Max. Discharge Pressure: 2,320 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 7.6 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 13.35 oz
• Weight: 17.0 lb.

General EP1813S17 Triplex EP Series 1,750 RPM Solid Shaft Plunger Pump.

Features:
• Triplex plunger pump
• New Forged brass manifold
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.2 GPM
• Max. Discharge Pressure: 2,900 PSI
• Horsepower: 8.3 HP
• Max. Pump Speed: 1,750 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 15 oz
• Max. Fluid Temp.: 165 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Replaces TX1813S17
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 15.4 lb.

• Triplex Plunger Pump · Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 5.0 BHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 13.4 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 6.0 BHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 13.4 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.2 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 5.0 BHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 13.4 lb.

General EP1811S17 Triplex EP Series 1,750 RPM Solid Shaft Plunger Pump.

Features:
• Triplex plunger pump
• New Forged brass manifold
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal

Specifications Sheet

Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.7 GPM
• Max. Discharge Pressure: 2,500 PSI
• Horsepower: 6.2 HP
• Max. Pump Speed: 1,750 RPM
• Oil Capacity: 15 oz
• Max. Fluid Temp.: 165 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Weight: 15.4 lb.

General EP1812S17 Triplex EP Series 1,750 RPM Solid Shaft Plunger Pump.

Features:
• Triplex plunger pump
• New Forged brass manifold
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal

Specifications Sheet

Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Horsepower: 6.6 HP
• Max. Pump Speed: 1,750 RPM
• Oil Capacity: 15 oz
• Max. Fluid Temp.: 165 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Weight: 15.4 lb.

Annovi Reverberi / AR North America RK NL Version Pump with 24mm solid shaft and 1,450 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 5.55 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 11.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.