General Pump

GP Hose Reel Swivel 5,000 PSI Forged Brass DHR (Old Style)

Compatible with DHR50100D, DHR50150D, DHR50100K and 2100357 hose reels with whip hose

Replaces GP # 2103051

GP Hose Reel Swivel 5,000 PSI Forged Brass DHR (New Style)

Compatible with DHR50100, DHR50150 & DHRHC50100 hose reels

General Pump 2103240 Replacement Hose Reel Swivel

Specifications:
• Works with General Pump hose reel models D30004 & D30006
• Swivel Size: 3/4" M x 3/8" F
• Max Pressure: 4,000 PSI
• Replaces 41.0088
• Weight: 9.6 oz

General Pump 2103241 Replacement Hose Reel Swivel

Specifications:
• Works with General Pump hose reel models D30001 & D30002
• Swivel Size: 1/2" M x 3/8" F
• Max Pressure: 4,000 PSI
• Replaces 41.0087
• Weight: 8.8 oz

General Pump 2702000 Hose For Hammerhead Surface Cleaners DCFSCP20, DCFSCP20GZ, DCFSCS22Z & DCFSCP24GZ

General Pump Hose For Hammerhead DCFS 18 Surface Cleaners DCFSCP18 & DCFSCP18GZ

General Pump D10067 High Pressure Stainless Steel Swivel 3/8" M x 3/8" F 5,000 PSI

Specifications:
• Body Material: Stainless steel
• Max GPM: 10
• Rated PSI: 5,000
• Max PSI: 5,000
• Max Temp: 200°
• Inlet: 3/8" NPT-M
• Outlet: 3/8" NPT-F
• Weight: 3.5 oz

GP TS38250 High Limit TS Series Thermal Switch 3/8" NPT 250º F with 68" Wire Lead

Features
• Simple installation
• 68” 18 AWG Cable
• Normally Closed
• Can be mounted in any position
• Factory calibrated
• Made in the USA
• Precision snap action internal switches

TS Series Snap Action Data Sheet

Specifications
• Maximum Pressure: 5,000 PSI
• Voltage: 5 AMPS at 120 VAC
• Cord Length: 68”
• Temperature: 250º F
• Inlet: 3/8” NPT
• Switch Dimensions: 2.5" x 1"
• Materials: Brass, Steel, Nylon, Epoxy
• Weight: 0.5 Lb

GP TS38230 High Limit TS Series Thermal Switch 3/8" NPT 230º F with 68" Wire Lead

Features
• Simple installation
• 68” 18 AWG Cable
• Normally Closed
• Can be mounted in any position
• Factory calibrated
• Made in the USA
• Precision snap action internal switches

TS Series Snap Action Data Sheet

Specifications
• Maximum Pressure: 5,000 PSI
• Voltage: 5 AMPS at 120 VAC
• Cord Length: 68”
• Temperature: 230º F
• Inlet: 3/8” NPT
• Switch Dimensions: 2.5" x 1"
• Materials: Brass, Steel, Nylon, Epoxy
• Weight: 0.5 Lb

GP TS38190 High Limit TS Series Thermal Switch 3/8" NPT 190º F with 68" Wire Lead

Features
• Simple installation
• 68” 18 AWG Cable
• Normally Closed
• Can be mounted in any position
• Factory calibrated
• Made in the USA
• Precision snap action internal switches

TS Series Snap Action Data Sheet

Specifications
• Maximum Pressure: 5,000 PSI
• Voltage: 5 AMPS at 120 VAC
• Cord Length: 68”
• Temperature: 190º F
• Inlet: 3/8” NPT
• Switch Dimensions: 2.5" x 1"
• Materials: Brass, Steel, Nylon, Epoxy
• Weight: 0.5 Lb

GP TS38150 High Limit TS Series Thermal Switch 3/8" NPT 150º F with 68" Wire Lead

Features
• Simple installation
• 68” 18 AWG Cable
• Normally Closed
• Can be mounted in any position
• Factory calibrated
• Made in the USA
• Precision snap action internal switches

TS Series Snap Action Data Sheet

Specifications
• Maximum Pressure: 5,000 PSI
• Voltage: 5 AMPS at 120 VAC
• Cord Length: 68”
• Temperature: 150º F
• Inlet: 3/8” NPT
• Switch Dimensions: 2.5" x 1"
• Materials: Brass, Steel, Nylon, Epoxy
• Weight: 0.5 Lb

GP TS12250 High Limit TS Series Thermal Switch 1/2" NPT 250º F with 68" Wire Lead

Features
• Simple installation
• 68” 18 AWG Cable
• Normally Closed
• Can be mounted in any position
• Factory calibrated
• Made in the USA
• Precision snap action internal switches

TS Series Snap Action Data Sheet

Specifications
• Maximum Pressure: 5,000 PSI
• Voltage: 5 AMPS at 120 VAC
• Cord Length: 68”
• Temperature: 250º F
• Inlet: 1/2” NPT
• Switch Dimensions: 2.5" x 1"
• Materials: Brass, Steel, Nylon, Epoxy
• Weight: 0.5 Lb

GP TS12230 High Limit TS Series Thermal Switch 1/2" NPT 230º F with 68" Wire Lead

Features
• Simple installation
• 68” 18 AWG Cable
• Normally Closed
• Can be mounted in any position
• Factory calibrated
• Made in the USA
• Precision snap action internal switches

TS Series Snap Action Data Sheet

Specifications
• Maximum Pressure: 5,000 PSI
• Voltage: 5 AMPS at 120 VAC
• Cord Length: 68”
• Temperature: 230º F
• Inlet: 1/2” NPT
• Switch Dimensions: 2.5" x 1"
• Materials: Brass, Steel, Nylon, Epoxy
• Weight: 0.5 Lb

GP TS12190 High Limit TS Series Thermal Switch 1/2" NPT 190º F with 68" Wire Lead

Features
• Simple installation
• 68” 18 AWG Cable
• Normally Closed
• Can be mounted in any position
• Factory calibrated
• Made in the USA
• Precision snap action internal switches

TS Series Snap Action Data Sheet

Specifications
• Maximum Pressure: 5,000 PSI
• Voltage: 5 AMPS at 120 VAC
• Cord Length: 68”
• Temperature: 190º F
• Inlet: 1/2” NPT
• Switch Dimensions: 2.5" x 1"
• Materials: Brass, Steel, Nylon, Epoxy
• Weight: 0.5 Lb

GP TS12150 High Limit TS Series Thermal Switch 1/2" NPT 150º F with 68" Wire Lead

Features
• Simple installation
• 68” 18 AWG Cable
• Normally Closed
• Can be mounted in any position
• Factory calibrated
• Made in the USA
• Precision snap action internal switches

TS Series Snap Action Data Sheet

Specifications
• Maximum Pressure: 5,000 PSI
• Voltage: 5 AMPS at 120 VAC
• Cord Length: 68”
• Temperature: 150º F
• Inlet: 1/2” NPT
• Switch Dimensions: 2.5" x 1"
• Materials: Brass, Steel, Nylon, Epoxy
• Weight: 0.5 Lb

General Pump #2.3mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.3 mm (5.0 to 8.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump #2.1mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.1 mm (3.0 to 5.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump #1.8mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 1.8 mm (2.0 to 3.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump #2.3mm Adjustable Chemical Injector 304 Stainless Steel, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• 304 Stainless Steel
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.3 mm (5.0 to 8.0 GPM)
• Max Operating Pressure: 5,500 PSI
• Max Temperature: 190° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.50 lbs

General Pump #2.1mm Adjustable Chemical Injector 304 Stainless Steel, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• 304 Stainless Steel
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.1 mm (3.0 to 5.0 GPM)
• Max Operating Pressure: 5,500 PSI
• Max Temperature: 190° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.50 lbs