General Pump

General Pump #3.0 Quick Connect (Q) Spray Nozzle 5-Pack

Features
• 5,000 PSI operating pressure
• Made in the USA
• Ceramic insert is resistant to wear
• Through-hardened stainless steel orifices offer superior wear resistance compared to standard case hardened nozzles
• Stainless steel housing resists cracking and wear
• Resistant to most chemical
• Large color coded tip protector on Q-type nozzles permits rapid identification of fan angle
• Laser marked for clarity and durability

Specifications
• Nozzle Size: 3.0
• Contents: One each of a 0º, 15º, 25º, 40º and 65º #40 soap nozzle
• Operating Pressure: 5,000 PSI
• Connection: 1/4” QC Plug
• Weight: 0.50 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General TMT Flow Switch. Stainless Steel Tri-Magnet technology in-line flow switch

Features
• Micro-switch technology eliminates reed switch
• Activates with 1.5 GPM flow
• Stainless Steel shuttle
• Minimal pressure drop up to 12 GPM flow
• Can be mounted in any position

Specifications
• Maximum Operating Pressure: 5,000 PSI
• Minimum Flow Required for Activation: 1.5 GPM @ 50 PS
• Maximum Operating Flow: 12.0 GPM
• Operating Temperature Range: 40 - 180 ºF
• Electrical Lead Length: 48” - 18AWG
• Max Switching Voltage: 250 VAC
• Max Switching Current: 5 AMPS
• Inlet: 3/8” x 18 NPT-F
• Outlet: 3/8” x 18 NPT-F
• Materials: Stainless Steel, Plastic, Nickel-plated Neodymium
• Weight: 1.0 Lb

General TMT Flow Switch. Tri-magnet technology in-line flow switch

Features
• Micro-switch technology eliminates reed switch
• Activates with 1.25 GPM flow
• Stainless Steel shuttle
• Minimal pressure drop up to 12 GPM flow
• Can be mounted in any position

Specifications
• Maximum Operating Pressure: 5,000 PSI
• Minimum Flow Required for Activation: 1.25 GPM
• Maximum Operating Flow: 12.0 GPM
• Operating Temperature Range: 40 - 180 ºF
• Electrical Lead Length: 48” - 18AWG
• Max Switching Voltage: 250 VAC
• Max Switching Current: 5 AMPS
• Inlet: 3/8” x 18 NPT-F
• Outlet: 3/8” x 18 NPT-F
• Replaces GP # 100934
• Materials: Brass, Stainless Steel, Plastic, Nickel-plated Neodymium
• Weight: 1.0 Lb

General Pump ZH1520 Trapped Pressure Unloader Valve 2,465 PSI 52.8 GPM 1” NPT-F

Features
• Suitable for Industrial use
• Provisions for Panel Mounting
• Suitable for Industrial use
• Single bypass port
• Extremely reliable
• Easy maintenance

Specifications Sheet

Specifications
• Max Volume: 52.8 GPM
• Min Volume: 5.28 GPM
• Maximum Operating Pressure: 2,465 PSI
• Maximum Temperature: 185° F
• Inlet Port: 1" NPT-F
• Outlet Port: 1" NPT-F
• Bypass Port: 1" NPT-F
• Dimensions: 8.27” x 5.07” x 1.81”
• VRP175, VRP 175
• Weight: 4.4 Lbs

General Pump ZH168 Trapped Unloader (White) 2,320 PSI 21.1 GPM 1/2” NPT-F

Features
• Suitable for Industrial use
• Dual bypass port
• Extremely reliable
• Easy maintenance

Specifications Sheet

Specifications
• Max Volume: 21.1 GPM
• Maximum Operating Pressure: 2,320 PSI
• Maximum Temperature: 185° F
• Inlet: (2) 1/2" NPT-F
• Outlet: 1/2" NPT-F
• Bypass: 1/2" NPT-F
• Spring Color: White
• Dimensions: 9.15” x 3.69” x 1.81”
• Weight: 2..87 Lbs

General Pump ZH288 Trapped Unloader (Blue/Green) 4,060 PSI 21.1 GPM 1/2” NPT-F

Features
• Suitable for Industrial use
• Dual bypass port
• Extremely reliable
• Easy maintenance

Specifications Sheet

Specifications
• Max Volume: 21.1 GPM
• Maximum Operating Pressure: 4,060 PSI
• Maximum Temperature: 185° F
• Inlet: (2) 1/2" NPT-F
• Outlet: 1/2" NPT-F
• Bypass: 1/2" NPT-F
• Spring Color: Green
• Note: Spring color changed to green late 2022
• Dimensions: 9.15” x 3.69” x 1.81”
• Weight: 2.87 Lbs

3,500 PSI 4.0 GPM General TSS1511 Solid Shaft Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:
• General TSS1511 Pump with 24MM solid shaft
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 13.0 GHP
• Max. Fluid Temp.: 165º F
• Forged brass manifold with an exclusive lifetime warranty
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves
• Designed for suction applications
• Manifold with fine thread valve caps

COMPONENTS:
• General TSS1511 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket Installed and 3/8” QC Plug Included
• Mounting rails included
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 35.55 lb

General YVB9KMS2 Trapped Pressure Unloader w/ Microswitch 3,650 PSI 8.0 GPM

Features:
• Extremely durable construction in stainless steel and brass
• Easy start-up due to low re-arm pressure (27% of operating pressure)
• Hexagonal discharge check valve to prevent binding
• Unloader with microswitch
• Waterproof, 5-amp pressure switch, UL Listed

Specifications:
• Rated Pressure: 3,200 PSI
• Maximum Pressure: 3,650 PSI
• Rated Temperature: 195° F
• Maximum Flow: 8.0 GPM
• Pressure Switch: 1 amp ind., 5 amps res, 250 Volts
• Inlet Port: 3/8” BSP-F
• Outlet Port: 3/8” BSP-F
• Bypass Port: 3/8” BSP-F
• Gauge Port: 1/4” F
• Weight: 1.6 lbs

General TMT Flow Switch With Pilot Feature

Features
• Micro-switch technology eliminates reed switch
• Activates with as little as .5 gpm flow
• Minimal pressure drop up to 12 gpm flow
• Mount in vertical position

Specifications
• Maximum Operating Pressure: 4,000 PSI
• Minimum Flow Required for Activation: 0.5 GPM @ 50 PSI
• Maximum Operating Flow: 12.0 GPM
• Operating Temperature Range: 40 - 180 ºF
• Electrical Lead Length: 48” - 18AWG
• Max Switching Voltage: 250 VAC
• Max Switching Current: 5 AMPS
• Inlet: 3/8” x 18 NPT-F
• Outlet: 3/8” x 18 NPT-F
• Pilot: 1/4” Hose Barb
• Material: Buna-N, Brass, Plastic, Nickel Plated Neodymium
• Weight: 1.3 Lb

General TIMAX Pressure Regulating Valve 900 PSI 53 GPM

General Pump Valve Assembly, Inlet

General Pump Series 100 Oil, 6-Pack of 16 oz. Bottles

General Pump 100295 Series 100 Oil, 16 oz. Bottle. General Industrial Oil is a premium multi-purpose lubrication formulated to protect against rust and oxidation. It offers long service life and prevents sludge and varnish formation, even at high temperatures

Features:
• General Industrial Oil possesses a high natural viscosity index. This means more constant operating characteristics over wide temperature range
• Recommended for use in General Pump crankcases on systems requiring less than 25 BHP. Initial oil change after break-in period between 50 and 100 hours. Then every three months of 300 hours of operation thereafter. Check oil level in crankcase daily or before each use.
• Regular lubrication is the easiest, most efficient and least expensive element in preventive maintenance

Specifications:
• Special anti-scuff and anti-wear agents extend the lives of gear, vane, radial piston and plunger pumps
• Resists foaming and aeration
• Highly resistant to oxidation that would result in sludge formation
• Resistas formation of harmful oil water emulsions
• Compatible with typically used seals and gaskets
• High viscosity index (IV) means more constant operating characteristics over wide temperature ranges
• Low pour point assures fluid flow during cold weather operation
• Outstanding thermal and hydrolytic stability assures long oil life
• Exceeds wear prevention requirements of all major hydraulic pump manufactures
• Packaged in one 16 oz bottle
• Weight: 1 lbs

General 47200274 Pump Rail / Foot 2-5/8", 47, 66 Series, Tall

General Pump Outlet Valve Kit

General Pump New Manifold Only MW/MWR

General Pump Kit 15066 Valve

General Pump Kit 175 Packing 16mm

General Pump Kit 174 Seal 16mm

• Jetter Valve
• Turn a General Pump into a Sewer Jetting machine the inexpensive way!
• Use with General Pump TT series pumps
• Generates flow pulsations on demand to improve nozzle movement and cleaning power in sewer cleaning applications
• Simple operation allows both full-flow and pulsation modes
• Large, easy to grasp handle
• Easy installation, replace middle inlet valve cap and valve
• Maximum Pressure: 5,000 PSI
• Weight: 0.5 lbs