Wet Sand Blaster

Suttner ST-55 Sandblasting Kit #4.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 4.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Suttner ST-55 Sandblasting Kit #5.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 5.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-55 Sandblasting Kit #6.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 6.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-55 Sandblasting Kit #7.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 7.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-55 Sandblasting Kit #8.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 8.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #3.0 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 3.0
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #4.0 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 4.0
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #5.5 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 5.5
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #6.5 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 6.5
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-555 Professional Sandblaster #7.5 Stainless Steel with Adjustable Sand Flow. Removes coatings from almost any surface. Ideal for cleaning of machines, technical facilities, facades and masonry. Thanks to its stainless steel body, the ST-555 features utmost pressure resistance up to a continuous operating pressure of 7,250 PSI. The three symmetrical high-pressure nozzles in the blasting head provide for a flow of the blasting agent without any deflections. This is how wear of the ceramic diffuser nozzle with TPE coating is reduced to a minimum and pulse energy of the blasting agent is used optimally

FEATURES:
• High Quality, German engineered components
• The Sandblaster ST-555 has stainless steel construction 
• The sandblaster is suitable for dust-free blasting of solids with a grain size ranging from 0.4 to 0.8 mm
• With suction quantity control at the double suction pipe
• Sand blasting nozzle made of high-performance ceramics
• Inclusive: 3 hardened stainless steel nozzles

Multiple mediums can be used:
• Glass beads for cleaning of copper and bronze as well as polishing of stainless steel
• Glass powder for cleaning of stainless steel and natural stone or for removal of graffiti from light surfaces
• Slag (fine) for cleaning of sandstone or brick as well as removal of graffiti from dark surfaces
• Slag (coarse) removal of rust from metals or of old coatings and paintings. cleaning and grinding of concrete surfaces
• Sodium carbonate (water-soluble) cleaning of sensitive surfaces such as aluminum, glass, plastics, stainless steel
• Mineral blasting agent (sand) removal of rust from metals or of old coatings and paintings. Cleaning and grinding of concrete surfaces. Varnish removal

ST-555 Sandblaster on YouTube

SPECIFICATIONS:
• Nozzle Size: # 7.5
• Min Flow Rate: 3.0 GPM
• Max Flow Rate: 7.5 GPM
• Max Pressure: 7,250 PSI
• Max Temp: 212° F
• Hose Length: 13'
• Inlet: Male M22, Yoke/Stem: 14MM
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart