General Pump lnline Adjustable Needle Valve. Adjustable SS Stem Allows Regulating the Opening in the Bore for Fine Control of Flow
Features
• Adjustable from full flow to full close
• Durable, comfortable handle
• Can be panel mounted in any position
• Made in the USA
Injector Specifications:
• Max Pressure: 4,000 PSI
• Maximum Flow: 6.0 GPM
• Max Temperature: 180° F
• Inlet: 1/4" NPT-F
• Outlet: 1/4" NPT-F
• Materials: Brass, Stainless, Plastic, Viton, Teflon
• Weight: 0.43 lbs
General Pump lnline Adjustable Needle Valve with Bottom Adjustable Metering Screw. Adjustable SS Stem Allows Regulating the Opening in the Bore for Fine Control of Flow
Features
• Adjustable from full flow to full close
• Full flow can be controlled with metering screw
• Durable, comfortable handle
• Can be panel mounted in any position
• Made in the USA
Injector Specifications:
• Max Pressure: 4,000 PSI
• Maximum Flow: 6.0 GPM
• Max Temperature: 180° F
• Inlet: 1/4" NPT-F
• Outlet: 1/4" NPT-F
• Materials: Brass, Stainless, Plastic, Viton, Teflon
• Weight: 0.40 lbs
General Pump lnline Adjustable Needle Valve with Side Adjustable Metering Screw. Adjustable SS Stem Allows Regulating the Opening in the Bore for Fine Control of Flow
Features
• Adjustable from full flow to full close
• Full flow can be controlled with metering screw
• Durable, comfortable handle
• Can be panel mounted in any position
• Made in the USA
Injector Specifications:
• Max Pressure: 4,000 PSI
• Maximum Flow: 6.0 GPM
• Max Temperature: 180° F
• Inlet: 1/4" NPT-F
• Outlet: 1/4" NPT-F
• Materials: Brass, Stainless, Plastic, Viton, Teflon
• Weight: 0.40 lbs
PA LS 12 / General Pump YLS12T Replacement 1 L Bottle
Only works with model 25.1840.15, 25.1840.65 & YLS12T
PA # 14.6506.00
PA RL 57 / GP YG7207 Easy Pull Spray Gun 8,000 PSI 7.5 GPM. No fluid passage upon trigger release. New mechanical device with double connecting rods to guarantee less strain when opening and holding
Features
• Covered by shockproof plastic semi-housings
• Seat in Sst and ball in Widia
• Totally built in stainless steel AISI 303
• Ergonomic construction
• Minimum fatigue for trigger opening and use
• New mechanical opening device with double connecting rods
• New trigger design, rotating on a fixed pin to guarantee better mobility and steadiness
Specifications
• Rated Pressure: 7,250 PSI
• Permissible Pressure: 8,000 PSI
• Max Flow: 7.5 GPM
• Max Temp: 320° F.
• Inlet: 3/8" NPT-F
• Outlet: 1/4" NPT-F
• Use # 2100378 matching 36” lance
• Replaces 30.4700.00
• Weight: 25.18 oz
PA RLW 40 / General Pump YG3000D Dump Gun with 40" Lance 3,050 PSI 10.5 GPM. Low pressure weeping gun; High pressure function by trigger operation
Features
• Covered by shockproof plastic semi-housings
• High/low pressure gun with double concentric outlet
• Delrin shutter
• Internal structure in brass and stainless steel
• Ergonomic construction
• Minimum fatigue for trigger opening
Specifications
• Rated Pressure: 2,750 PSI
• Permissible Pressure: 3,050 PSI
• Lance: 39.40”
• Max Flow: 10.5 GPM
• Max Temp: 140° F.
• Inlet: 3/8" NPT-F
• Outlet: 1/8" NPT-F
• Weight: 48.04 oz
PA RLW 40 / General Pump YG3000DS Dump Gun with 16" Lance 3,050 PSI 10.5 GPM. Low pressure weeping gun; High pressure function by trigger operation
Features
• Covered by shockproof plastic semi-housings
• High/low pressure gun with double concentric outlet
• Delrin shutter
• Internal structure in brass and stainless steel
• Ergonomic construction
• Minimum fatigue for trigger opening
Specifications
• Rated Pressure: 2,750 PSI
• Permissible Pressure: 3,050 PSI
• Lance: 15.74”
• Max Flow: 10.5 GPM
• Max Temp: 140° F.
• Inlet: 3/8" NPT-F
• Outlet: 1/8" NPT-F
• Weight: 33.44 oz
PA TR1 /GP YADJNOZ Adjustable Hi / Low Nozzle Holder. The adjustable nozzle holder TR1 can work with pressures up to 4,050 PSI and with flow rates up to 8 GPM
Features
• By turning the plastic protection it is possible to switch from high to low pressure
• This type of device is normally used with high-pressure cleaners that provide for the mixing of water with chemical product by means of a Venturi injector
Specifications
• Rated Pressure: 3,650 PSI
• Permissible Pressure: 4,050 PSI
• Rated Flow Rate: 8 GPM
• Rated Temperature: 300° F.
• Body Material: Brass
• Inlet: 1/4 Npt F
• Outlet: 1/4 Npt F
• Weight: 4.06 oz.
• Note: Requires one 1/4” MPT nozzle, which is not included
PA FL 12 / General Pump YFL12 4,500 PSI 26.4 GPM Flow Switch with 3/4" NPT-F inlet
Features
• Electro-mechanical device in which the fluid passage moves a magnetized piston that opens an electric circuit. DN 20
• Magnetic drive obtained by the plunging piston movement
• Electrical insulation: class IP55
• Magnetic probe casing made of antiflame material
Specifications
• Rated Pressure: 4,000 PSI
• Permissible Pressure: 4,500 PSI
• Max Flow Rate: 26.4 GPM
• Activation Flow Rate: Horizontal: 2.0 GPM
• Activation Flow Rate: Vertical: 3.3 GPM
• Max Working Temp: 165° F
• Max. Voltage: 230 V
• Max. Curr. Strength: 3 A
• Cable Length: 49.2" (1250 mm)
• Electrical insulation: 55 IP - 0
• Materials: Brass, Stainless Steel, Buna-N, Plastic
• Inlet: 3/4" NPT-F
• Outlet: 3/4" NPT-F
• Weight: 34.4 oz.