General Pump

General Pump 36” Stainless Steel Vented Grip Lance & Nozzle Protector. Rated to 10.5 GPM and 7,250 PSI

Specifications
• Max Pressure: 7,250 PSI
• Max Flow: 10.5 GPM
• Max Temperature: 220° F
• Inlet 1/4" NPT-M
• Outlet 1/4" NPT-F with nozzle protector
• Works best with 1/4" NPT-M nozzles (not included)
• Matching lance for GP YG7207 & PA RL57 spray gun
• Weight: 2.2 lbs

General Pump ZZDBL 36” Heavyweight Dual Lance

Features:
• ZZDBL lances provide a convenient method of operating a downstream chemical injection system by turning the insulated adjustment handle
• Designed for hot or cold water systems
• ZZDBL lances couple easily to trigger guns and feature a round reinforced polymer insulator mounted to zinc-plated steel pipe for comfort and durability

Specifications:
• Length: 36"
• Inlet: 1/4" NPT-M
• Outlet Nozzle Fittings (2): 1/4" NPT-F
• Rated Pressure: 3,650 PSI
• Max. Pressure: 4,050 PSI
• Max. Volume: 10.5 GPM
• Max. Temp.: 284° F
• Note: Nozzles not included
• Weight: 3.20 lbs

General TS2021L Triplex Plunger Pump (Left Handed). The preferred pump frame in the pressure cleaning industry

Features:
• Forged, nickel-plated, brass manifold with an exclusive lifetime warranty
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Heavy-duty tapered roller bearing
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 5.6 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 18.0 GHP
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8-19 BSPP-F
• Drive Side: Left
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 32.0 lb.

General TS2021 Triplex Plunger Pump. The preferred pump frame in the pressure cleaning industry

Features:
• Forged, nickel-plated, brass manifold with an exclusive lifetime warranty
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Heavy-duty tapered roller bearing
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 5.6 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 18.0 GHP
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8-19 BSPP-F
• Drive Side: Standard right
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 32.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 13.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Nickel plated brass head & valve covers
• Solid ceramic plungers
• Weight: 33.0 lb.

General TSS1511 Triplex Plunger Pump. The preferred pump frame in the pressure cleaning industry

Features:
• Forged brass manifold with an exclusive lifetime warranty
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves
• Designed for suction applications
• Manifold with fine thread valve caps

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 13.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces TS1511 & TS1011
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 32.0 lb.

General TSS1021 Triplex Plunger Pump. The preferred pump frame in the pressure cleaning industry

Features:
• Forged brass manifold with an exclusive lifetime warranty
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves
• Designed for suction applications
• Manifold with fine thread valve caps

Specifications Sheet

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.5 / 5.6 GPM
• Max. Discharge Pressure: 3,500 / 1,700 PSI
• Max. Pump Speed: 1,125 / 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 13.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces PG564
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 32.0 lb.

General TSS1511 Triplex Plunger Pump (Left Handed). The preferred pump frame in the pressure cleaning industry

Features:
• Forged brass manifold with an exclusive lifetime warranty
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves
• Designed for suction applications
• Manifold with fine thread valve caps

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 13.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Left
• Forged brass head & valve covers
• Solid ceramic plungers
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 32.0 lb.

General EZ3040S 3000 PSI, 4.0 GPM Solid Shaft Pump for belt drive, flex coupling or gear reduction

Features:
• Solid ceramic plunger design
• Flex coupling and bell housing available for direct drive
• Forged brass manifold with 4:1 hydrostatic rating
• Die-cast, anodized aluminum, oil-bath crankcase
• Premium roller bearing
• Unitized stainless steel inlet and discharge valves
• Available in “L” left-handed versions

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications Sheet

Specifications:
• Triplex Plunger Pump
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 24MM Solid
• Max. Horsepower Requirements: 8.2 EBHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8-19 BSPP-F
• Drive Side: Standard right>
• Crankcase Oil Capacity: 14.0 oz
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 18.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 11.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Nickel plated brass head & valve covers
• Solid ceramic plungers
• Weight: 33.0 lb.

• Triplex Plunger Pump
• Direct Drive with Gas Flange 9.0-13.0 HP SAE
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 3,000 PSI · Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 9.5 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head
• Solid ceramic plungers
• Weight: 19.1 lb.

General TSF2221 66 Series High Flow Triplex Plunger Pump

Features:
• Oversized roller bearings
• Fully anodized crankcase
• Innovative new seal design extends seal life
• New plunger design improves thermal shock resistance
• New valve cap improves hydrostatic performance

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Discharge Pressure: 3,000 PSI
• Max. Volume: 8.5 GPM @ 1,450 RPM
• Max. Volume: 10.2 GPM @ 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements (EBHP): 17.5 @ 8.5 GPM/21.0 @ 10.2 GPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 33.8oz.
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 3/4"-14 BSP-F
• Discharge Ports (2): 3/8-19 BSP-F
• Drive Side: Standard right
• Dimensions: 14.94" x 9.78" x 6.99"
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 40.7 lb.

General EZ3042S 3000 PSI, 4.2 GPM Solid Shaft Pump for belt drive, flex coupling or gear reduction

Features:
• Solid ceramic plunger design
• Flex coupling and bell housing available for direct drive
• Forged brass manifold with 4:1 hydrostatic rating
• Die-cast, anodized aluminum, oil-bath crankcase
• Premium roller bearing
• Unitized stainless steel inlet and discharge valves
• Available in “L” left-handed versions

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications Sheet

Specifications:
• Triplex Plunger Pump
• Max. Volume: 4.2 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24MM Solid
• Max. Horsepower Requirements: 8.6 EBHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8-19 BSPP-F
• Drive Side: Standard right>
• Crankcase Oil Capacity: 14.0 oz
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 18.0 lb.

General Pump DHRA50450SS 3/8" x 450', 3/4" x 250' Stainless Steel "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with locking pin and folding mechanism
• Heavy duty stainless steel construction
• Full flow stainless steel swivel
• Variable friction brake
• Many available accessories
• Includes one D10032 Fitting 3/4” GH X 1/2 NPT-M

DHRA SS Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 450’
• Capacity 5/8" Garden Hose: 325’
• Capacity 3/4" Garden Hose: 250’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Note: Unit pictured is model DHRA50150SS
• Gross Weight 48.0 lbs

General Pump DHRA50450 3/8" x 450' or 1/2" x 375' or 5/8” x 300’ (garden hose). "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with pin lock
• Solid steel construction
• Durable gray high-gloss powder coated finish
• Full flow stainless steel swivel
• Friction brake
• Switchable swivel/handle
• HD steel welded frame
• HD sealed axle bearings
• Includes one D10032 Fitting 3/4” GH X 1/2 NPT-M

DHRA Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 450’
• Capacity 5/8" Garden Hose: 325’
• Capacity 3/4" Garden Hose: 250’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Color: Black
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Carton Dimensions: 26” x 20” x 18”
• Gross Weight 47.6 lbs

General Pump DHRA50300SS 3/8" x 300', 3/4" x 175' Stainless Steel "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with locking pin and folding mechanism
• Heavy duty stainless steel construction
• Full flow stainless steel swivel
• Variable friction brake
• Many available accessories
• Includes one D10032 Fitting 3/4” GH X 1/2 NPT-M

DHRA SS Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 300’
• Capacity 5/8" Garden Hose: 225’
• Capacity 3/4" Garden Hose: 175’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Note: Unit pictured is model DHRA50150SS
• Gross Weight 41.97 lbs

General Pump DHRA50300 3/8" x 300', 1/2" x 250' "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with pin lock
• Solid steel construction
• Durable gray high-gloss powder coated finish
• Full flow stainless steel swivel
• Friction brake
• Switchable swivel/handle
• HD steel welded frame
• HD sealed axle bearings

DHRA Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 300’
• Capacity 5/8" Garden Hose: 225’
• Capacity 3/4" Garden Hose: 175’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Color: Black
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Carton Dimensions: 21” x 20” x 18”
• Gross Weight 41.9 lbs

General Pump DHRTM50200 3/8" x 200' Trailer Mount Hose Reel. Rated 5,000 PSI and up to 250° F. Heavy duty steel frame and 360° swivel rotation is ideal for pressure washer and sewer jetter use.

FEATURES
• Direct hand-crank rewind with locking pin
• Solid steel construction
• Durable black powder coated finish
• 360° swivel rotation
• Robust folding handle
• 180° pivoting hose guide
• Adjustable friction lever brake
• Full flow high pressure stainless steel swivel

SPECIFICATIONS
• Capacity: 200’ of 3/8” pressure washer/sewer jetter hose
• Max. PSI: 5,000
• Max Temp: 250° F.
• Color: Black
• Inlet: 1/2 NPT-F (Includes reducer 1/2NPT-M x 3/8NPT-F )
• Outlet: 1/2 NPT-F (Includes reducer 1/2NPT-M x 3/8NPT-F )
• Carton Dimensions: 26.0” x 18.0” x 17.75”
• Note: Mounting bracket not included
• Weight 33.0 lbs

General Pump D30006 3/8" x 200' Steel Hose Reel with Mounting Base. Rated 4,000 PSI and up to 185° F. Heavy duty steel frame structure is ideal for pressure washer and sewer jetter use. Quickly and easily mounts to most vertical and horizontal surfaces

FEATURES
• Direct hand-crank rewind with pin lock
• Solid steel construction
• Durable black powder coated finish
• Brass swivel with Stainless Steel internal stem
• Hardware provided for mounting to cart handle or bumper

SPECIFICATIONS
• Capacity: 200’ of 3/8” pressure washer/sewer jetter hose
• Max. PSI: 4,000
• Max Temp: 185° F.
• Color: Black
• Inlet: 3/8 NPT-F
• Outlet: 3/8 NPT-F
• Diimensions: 19.3” L x 13.4” W x 16.3” H
• Weight 15.65 lbs

General Pump DHRWM50200 3/8" x 200' Professional Hose Reel. Rated 4,000 PSI and up to 185° F. Heavy duty steel frame structure is ideal for pressure washer and sewer jetter use.

FEATURES
• Direct hand crank with locking pin
• Full flow swivel
• Solid steel construction
• Durable black powder coated finish
• 5,000 PSI rated swivel
• Reduces garage and workshop clutter
• Extends hose life!
• Wall mounting kit available (2100531)

SPECIFICATIONS
• Capacity: 200’ of 3/8” pressure washer/sewer jetter hose
• Max. PSI: 4,000
• Max Temp: 185° F.
• Color: Black
• Inlet: 3/8 NPT-M
• Outlet: 3/8 NPT-F
• Carton Dimensions: 16.0” x 17.5” x 17.5”
• Weight 19.0 lbs