Comet ZWD4040G Industrial Duty Pump Fully Plumbed with EZ Start Unloader, Chemical Injector & Thermal Valve. This ZWD 4040G 4,000 PSI & 4.0 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP.
Features
• Reversible Crankshaft for Easy Right or Left Hand Mounting
• Increased Fin Depth Increases Surface Area to Maximize Heat Dissipation
• Stainless Steel Unitized Check Valves
• Heat-Resistant Solid Ceramic Plungers Operating on Lubricated Packings
• Direct Drive Gas Engine Mounting Flange (SAE J609B)
• Reinforced Crankcase for Increased Load Capacity
• Enlarged Crankcase Increases Oil Capacity for Better Lubrication and Lower Operating Temperatures
• One-Piece Industrial-Grade Oversized Bronze Connecting Rods
Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.5 GHP
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" FPT
• Oil capacity: 14 oz
Componets
• VRT3-310 Adjustable easy start pressure unloader
• Clear bowl water Inlet Filter 3/4 FGH
• Adjustable chemical injector with hose & filter
• Thermal relief valve protects pump from overheating
• 3/8” Brass QC socket
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 23 lb
Comet DWD-K 2530 G 3,000 PSI 2.3 GPM Commercial Duty Triplex Plunger Pump Fully Plumbed with Adjustable Unloader and Chemical Injector
Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Forged brass manifold and ceramic plungers to prevent pitting and wear
• Built-in unloader and chemical injector for quick plug and play on systems
• Lubricated double seal packings to increase pump longevity (high & low)
• Anodized crankcase to protect from the harshest elements
• Ceramic Plungers
• Stainless steel check valves to keep pump at optimal performance.
• Featuring a 3/4” hollow shaft with flange for coupling to gas engines.
ADDITIONAL FEATURES OF PLUMBED MADE READY PUMP:
• 3 Foot soap hose with filter
• 3/8” QC plug
• Thermal relief valve
• Garden hose adapter with spring
Specifications:
• Max. Volume: 2.3 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 6.3 GHP
• Inlet Port: 3/4" GH (garden hose)
• Outlet Port: 22M-14 Male Twist Connect with 3/8" QC Plug
• Note: Optional D10088 3/8" QD Coupler shown below
• Weight: 11.55 lb.
Comet 6130.0001.00C P 33-T Big Mouth 12 Volt Automatic Waste Pump System. Quit wasting time and money with the competition!
Features:
• Big mouth valves that effortlessly pass solids and debris
• Stainless steel motor shaft and wetted parts for increased corrosion resistance
• Includes pulse dampener to greatly reduce pulsation vibration
• Simplified cleaning and maintenance of valves with accessible u-bolts
• Compact footprint for any wastewater truck mount system
• Sturdy, powder-coated external mounting base
• Featuring a 12-volt Bison motor for continuous performance
• Full One Year Limited Warranty
Specifications:
• HP: 0.5
• VDC: 12
• AMPS: 12
• GPM: 8
• RPM: 360
• Inlet: 1"
• Outlet: 3/4"
• Dimensions: 20.5” L x 12” W x 10.5” H
• Weight: 39 lb.
Comet 1800.0002.00KT P33-T Pump Diaphragm Kit
Kit includes:
2 Diaphragms (# 1800.0002)
Comet 1220.0046.00KT P33-T Pump Suction/Delivery Valve Assembly Kit
Kit includes:
4 Suction/Delivery Valve Assembly (# 1220.0098)
Comet 1204.0564.00 Pressure Regulator for APS41 and APS41AP
Port Sizes: two 3/8" ball valve outlets and a 3/8" hose barb bypass
With pressure gauge, adjustable pressure knob, and manual dump lever
Comet 1204.0712.00 Group Body Kit for P40
40Comet 5026.0419.00 P40 Diaphragm & Valve Ordinary Maintenance Kit
Kit includes:
3 Diaphragms (# 1800.0020)
6 Valve Assemblies with O-Rings (# 1220.0105)
6 O-Rings (# 1210.0506)
Comet 5026.0347.00 Repair Kit for MC25 Diaphragm Pump. Works on the Comet MC25, MC25GR34, and MC25-115V Diaphragm Pumps
Kit includes:
2 Buna Diaphragms (# 1800.0020)
1 Accumulator Diaphragm (# 1800.0033)
4 Valve Assemblies with O-Rings (# 1212.0004)
4 Silicone O-Rings (# 1210.0052)
Comet Premium RWS 6040 S Series Triplex Plunger Pump (Left Hand)
• Solid Shaft 24mm for Belt Drive, Gearbox or Flex Couplers
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer Life up to 4000 PSI
• One Piece, Solid Bronze Alloy Connection Rods
• High Quality Tapered Roller Bearings
• Large 25 oz oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Oil Cap: New Travel/Working Oil Cap
• Max. Volume: 6.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Fluid Temp.: 145º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Left hand
• Weight: 27.0 lb.
Comet LWS 3020 E W/SHIM 2,000 PSI 3.1 GPM Pump
• Triplex Plunger Pump with SHIM
• Max. Volume: 3.1 GPM
• Max. Discharge Pressure: 2,000 PSI · Max. Pump Speed: 1750 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 4.0 BHP
• Max. Fluid Temp.: 145º degrees F.
• Inlet Ports (2): 1/2" NPT · Discharge Ports (2): 3/8" NPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 13.4 lb.
Comet SWS 4040 S Triplex Plunger Hot Water Pump with Kevlar Seals. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Brass Head
• Reversible Crankcase for Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring Under the Seal
• Solid Brass Manifolds
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• Highly Quality Tapered Roller Bearings
• Optimal Oil Bath for High Speed Operation
• 24mm Solid Shaft for Belt Drive, Gearbox or Flex Couplers
• Hot Water Pump with Kevlar Seals
Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max Temperature: 185° F
• Inlet Ports: 1/2" FBSP
• Outlet Ports: 3/8" FBSP
• Code 6516010100
• Weight: 40.0 lb.
Comet 8402.0260.00 Rubber Foot 2" x 1" for pressure washer carts and frames
Comet Hydro Excavation Lance 1/2” x 5' Schedule 80 Aluminum MxM 4,000 PSI
Specifications:
• Length: 5'
• Pipe Material: Schedule 80 aluminum
• Inlet: 1/2” MNPT
• Outlet: 1/2” MNPT
• Max Temp: 300° F.
• Maximum Pressure: 4,000 PSI
• Over 48" surcharge: $4.50 will be added to shipping
• Weight: 5.50 Lbs
Comet Hydro Excavation Lance 1/2” x 6' Schedule 80 Aluminum MxM 4,000 PSI
Specifications:
• Length: 6'
• Pipe Material: Schedule 80 aluminum
• Inlet: 1/2” MNPT
• Outlet: 1/2” MNPT
• Max Temp: 300° F.
• Maximum Pressure: 4,000 PSI
• Over 48" surcharge: $4.50 will be added to shipping
• Weight: 6.50 Lbs
Comet Hydro Excavation Lance 1/2” x 4' Schedule 80 Aluminum MxM 4,000 PSI
Specifications:
• Length: 4'
• Pipe Material: Schedule 80 aluminum
• Inlet: 1/2” MNPT
• Outlet: 1/2” MNPT
• Max Temp: 300° F.
• Maximum Pressure: 4,000 PSI
• Over 48" surcharge: $4.50 will be added to shipping
• Weight: 4.0 Lbs
Comet LWS 3525 S 2,500 PSI 3.5 GPM Industrial Duty /Carpet Cleaning Triplex 24mm Solid Shaft Plunger Pump (Includes Hot Water Seals)
Features:
• Forged Bronze Connecting Rods with Lifetime Warranty
• Hardened Stainless Steel Piston Guides
• High Efficiency Stainless Steel Check Valves
• Abrasion Proof, Heat Resistant, Industrial Ceramic Plungers
• High Quality Buna-Textile Double-Sealing V-Packings
• Die-Cast, Anodized Aluminum Crankshaft-Fin Design for Optimal Operating Temperature
• High Quality Oversized Ball Bearings
• Optimal Oil Bath for High Speed Operation
• Designed For Belt Drive, Gearbox or Flex Couplers
• Hot water Seals Installed
Specifications:
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: Ø 24mm
• Shaft Style: Solid Shaft
• Maximum Horsepower Requirements: 7.95 GHP/ 5.9 EHP
• Inlet Connection: 1/2" FNPT
• Outlet Connection:3/8" FNPT
• Pump Head: Brass or Stainless Steel
• Oil Capacity: 11 fl oz
• LWS 3525 S pump (6301.1201.00) with hot water seals
• Weight: 13.4 lb.
Comet AWD 4030 G-K 3,000 PSI 4.0 GPM Commercial Duty triplex plunger pump with adjustable unloader & chemical injection
Features:
• Direct Drive Gas Engine Mounting Flange (SAE J609B)
• Built-In Uni-flow Unloader
• Fixed Chemical Injector
• Double Seal Packings (High & Low)
• Stainless Steel Check Valves
• Forged Brass Manifold
• Ceramic Plungers
• Anodized Crankcase
Specifications:
• Flow Rate: 4.0 GPM
• Max. Pressure: 3,000 PSI
• Shaft Size (Diameter): Ø 1"
• Shaft Style: Hollow Shaft - Gas Engines
• RPMs: 3,400
• Max. Horsepower Requirements: 10.9 GHP
• Inlet Connection: 1/2" FNPT
• Outlet Connection: 3/8" MNPT
• Pump Head: Brass
• Built-In Unloader: Yes
• Oil Capacity: 10 fl oz
• Weight: 14.4 lbs
Comet AWD 4036 G-K 3,600 PSI 4.0 GPM Commercial Duty triplex plunger pump with adjustable unloader & chemical injection
Features:
• Direct Drive Gas Engine Mounting Flange (SAE J609B)
• Built-In Uni-flow Unloader
• Fixed Chemical Injector
• Double Seal Packings (High & Low)
• Stainless Steel Check Valves
• Forged Brass Manifold
• Ceramic Plungers
• Anodized Crankcase
Specifications:
• Flow Rate: 4.0 GPM
• Max. Pressure: 3,600 PSI
• Shaft Size (Diameter): Ø 1"
• Shaft Style: Hollow Shaft - Gas Engines
• RPMs: 3,400
• Max. Horsepower Requirements: 13.09 GHP
• Inlet Connection: 1/2" FNPT
• Outlet Connection: 3/8" MNPT
• Pump Head: Brass
• Built-In Unloader: Yes
• Oil Capacity: 10 fl oz
• Weight: 14.4 lbs
Comet Pump 1/2” MPT Solid Brass Inlet Water Filter with Garden Hose Inlet and 1/4” Return Port. The line strainer or filter was designed to remove debris and sediment from the water supply entering the pump. It will prolong the life of a high pressure pump to use a line strainer for any water supply.
Features
• Inlet: 3/4" Female GHT
• Outlet: 1/2" MPT
• Return Port: 1/4" FPT
• Max Flow: 10.5 GPM
• Weight: 0.45 Lbs
Comet Pump 3/8” MPT Solid Brass Inlet Water Filter with Garden Hose Inlet and 1/4” Return Port. The line strainer or filter was designed to remove debris and sediment from the water supply entering the pump. It will prolong the life of a high pressure pump to use a line strainer for any water supply.
Features
• Inlet: 3/4" Female GHT
• Outlet: 3/8" MPT
• Return Port: 1/4" FPT
• Max Flow: 10.5 GPM
• Weight: 0.45 Lbs
• Comet LWD2020E-K Triplex Plunger Pump with Built-In Unloader and Chemical Injector (Left Handed)
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.1 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 3.0 BHP
• Max. Fluid Temp.: 145º degrees F.
• Inlet Port: 1/2" NPT
• Discharge Port: 3/8" NPT
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 13.4 lb.
Comet FW2 4040 S Solid Shaft Pump for Belt or Gear Drive. The FWS2 is the newest addition to comet’s industrial series of pumps
Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings
Specifications:
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Solid Shaft for Belt or Gear Drive
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 14.55 GHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Weight: 19.4 lb
Comet LWD 3025 G 2500 PSI, 3.0 GPM Comet Direct Drive Pump Assembly with VR54 unloader, thermal relief valve and garden hose inlet connector. This pump has all the necessary components to make installation a breeze!!
PUMP:
• Comet LWD3025G Triplex Plunger Pump
• Direct Drive with Gas Flange 3.0-6.5 HP SAE (2-9/16 center to center)
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.5 GHP
• Max. Fluid Temp.: 145º F
• Brass head & valve covers
• Forged Bronze Connecting Rods with Lifetime Warranty
• Hardened Stainless Steel Piston Guides
• High Efficiency Stainless Steel Check Valves
• Abrasion Proof, Heat Resistant, Industrial Ceramic Plungers
• High Quality Buna-Textile Double-Sealing V-Packings
COMPONENTS:
• Comet LWD3025G Triplex Plunger Pump
• Mecline VR54 adjustable pressure unloader
• Black bypass hose
• Thermal relief valve
• Inlet filter with 3/4" Female GHT
• 3/8” QC brass socket
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 16.0 lb
Comet EWD-K 4042G, EWD 4042 G-K Pump with Built-In Unloader, chemical injector, thermal valve and garden hose inlet connector. This 4, 200 PSI & 4.0 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP
Features
• Built-In adjustable unloader with chemical injector
• 1” Hollow Shaft with SAE J609B flange for coupling to gas engines
• High-strength Brass Pump Head
• New designed reversible carter made in special aluminum alloy
• Stainless –steel hardened piston guides
• Special plugs for dust protection
• O- ring and labyrinth oil seal system between crankcase and rear cover, to reduce oil splashing
• Wide oil level viewer
• Special aluminum alloy conrods made in a single piece
• Top-quality and oversized ball-needle bearings to ensure long durability
• Highly efficient stainless steel check valves with removable plugs for easy inspection
• Solid ceramic plungers, high corrosion and abrasion-proof
• High performance double sealing system
Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,200 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 15.27 GHP
COMPONENTS:
• Comet EWD-K 4042G Triplex Plunger Pump
• Thermal relief valve
• 3/4” Garden Hose Inlet Fitting
• 3/8” QC brass socket
• Mounting bolts
• Chemical injector hose and filter
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 16.10 lb
The Comet STATIC 1700 Extra Gold Electric Pressure Washer with TotalStop is a complete wall mountable and portable solution. Featuring an all brass Italian built pump producing 2.2 GPM and 1,300 PSI. This packaged unit includes 65’ rubber hose, hose reel and accessories
Features:
• Manufactured in Italy
• Sturdy structure with tubular frame for wall mounting
• Equipped with a quick wall coupling system with safety lock
• Handy support for housing all the accessories
• Standard hose reel with 65’ rubber delivery hose
• Water inlet with cartridge filter
• Comet electrical pump with three axial pistons arranged horizontally with pump at the bottom and an all-metal construction without any plastic used for the structural components
• Pump with brass head on all models
• EASY-START device
• TotalStop device
• Motor thermal protection
STATIC 1700 in Action with some additional accessories on YouTube
Accessories:
• Accessory rack supplied with the high-pressure cleaner
• GC 251 gun with protection
• Bent lance, with adjustable nozzle
• Bent lance, with rotating nozzle
• Rotating brush
• Hose reel with 65’ rubber high-pressure hose
• Foam lance 1L
Specifications:
• Flow: 2.2 GPM
• Max Pressure: 1,300 PSI
• Motor: 1150V/60 Electric
• Amps: 14
• Max Temp: 145° F.
• Manufacturer's Warranty: 12 months limited parts / No labor
• Shipping Weight: 55.60 lb
Comet Pump 12” water broom is used for cleaning vast surfaces quickly, which speeds up cleaning your driveway, deck, sidewalks, and any other surfaces. Using four nozzles, it cleans in forty percent less time than a regular nozzle!
Specifications:
• Size: 12"
• Three: # 1.3 @ 65°
• Casters: 2
• Construction: Aluminum, Steel & Stainless Steel
• Inlet Connection: 1/4 QC Plug
• Max Pressure: 4,000 PSI
• Max Flow: 3.0 GPM
• Weight 2.7 lbs.
Comet Pump Brass Pressure Washer Thermal Relief Valve with 3/8" Male Inlet
Specifications:
• Automatically Resets at Cool Down
• Compact Design
• Trip Temperature: 140º F.
• Brass body
• Inlet thread size: 3/8" Male NPT
• Installs in bypass line or inlet side of pump head
• Weight: 1.5 oz
Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
Actual O.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Comet Pump Brass Pressure Washer Thermal Relief Valve with 1/2" Male Inlet
Specifications:
• Automatically Resets at Cool Down
• Compact Design
• Trip Temperature: 140º F.
• Brass body
• Inlet thread size: 3/8" Male NPT
• Installs in bypass line or inlet side of pump head
• Weight: 2.4 oz
Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
Actual O.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Comet Pump 5,000 PSI High Pressure Inline Filter, 1/4” QC Plug x 1/4” MPT. Extend the life of your rotating or variable nozzle with an inlet filter
Features:
• 80 Mesh Screen
• SST w/Brass Insert
Specifications:
• Max. Pressure: 5,000 PSI
• Max. Volume: 10.5 GPM
• Screen: 80 Mesh
• Maximum Temperature: 194° F
• Inlet: 1/4" QC Plug
• Outlet: 1/4" MPT
• Weight: 0.20 lbs.
Comet Pump 5,000 PSI High Pressure Inline Filter, 1/4” FPT x 1/4” MPT. Extend the life of your rotating or variable nozzle with an inlet filter
Features:
• 80 Mesh Screen
• SST w/Brass Insert
Specifications:
• Max. Pressure: 5,000 PSI
• Max. Volume: 10.5 GPM
• Screen: 80 Mesh
• Maximum Temperature: 194° F
• Inlet: 1/4" FPT
• Outlet: 1/4" MPT
• Weight: 0.25 lbs.
Comet P40-GR Soft Wash Pump with Gear Box and Regulator. Unit delivers 11 GPM and up to 300 PSI. Compatible with Aggressive Softwash Chemicals
Features:
• Self-priming pump delivers pressures up to 150 PSI and flowrates of 9.0 GPM, allowing you to reach roof tops and second story siding, and perform quick rinses
• Features Duraphragm™ Technology extends the life of the diaphragms by shielding them from direct contact with the chemical inlet. This spreads inlet vacuum, often caused by a dirty suction filter or kinked hose, across the entire surface of the diaphragm instead of ocusing it on the one small area where most failures occur
• Chemical Resistant Wet Parts Compatible with Aggressive Softwash Chemicals
• Hexagonal Manifolds for Smooth and Quiet Operation
• Injection Molded Plastic Parts with UV Stabilization
• Secure Bracket System to Prevent Manifold Leaks
• Includes gear box and pressure regulator
• Fits standard engines with 3/4” keyed shaft
Specifications:
• Max Flow 11.0 GPM
• Max Pressure: 300 PSI
• Includes Gear Box and Pressure Regulator
• 3/4” Hose barb pressure o36utlet, 3/8”.hose barb bypass
• NOTE: THESE UNITS ARE DESIGNED TO BE FLUSHED IMMEDIATLEY AFTER EACH USE
• Dimensions: 16” L x 13” W x 14” H
• Replaces 6122.0008.00 (P36-GR)
• Weight: 25.6 lb.
Comet APS41 High Pressure Diaphragm Pump 10.8 GPM 580 PSI with gear reduction for gas engines with 3/4" shafts. The Comet APS41 is a high pressure, 3-diaphragm semi-hydraulic pump that is best used for lawn care, pest control, hydrostatic testing, and for horticultural and agricultural spraying
Specifications:
• Max Flow: 11 GPM
• Max Pressure: 580 PSI
• Max RPM: 550
• Port Sizes: 1" HB inlet, 1/2" HB outlet
• Gear Reduction: for gas engines with 3/4" shafts (5 to 6.5 hp engines)
• Pump Shaft Rotation: CW or CCW
• Diaphragms: 3, semi-hydraulic, Buna standard
• Housing: Anodized aluminum
• Head: Aluminum with plastic coating
• Recommended pressure regulator (not included): 1204.0564.00
• Max. Fluid Temperature: 140° F
• Pump Only Weight: 22.0 lbs
Comet Premium TW 13022S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 12.8 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Weight: 45.0 lb.
Comet Premium TW 14022S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 14.1 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Weight: 45.0 lb.
Comet Premium TWN 7025S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 7.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,000 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Weight: 45.0 lb.
Comet Premium TWN 8025S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 8.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,000 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Weight: 45.0 lb.
Comet Premium TWN 6036S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 6.0 GPM
• Max. Discharge Pressure: 3,600 PSI
• Max. Pump Speed: 1,000 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Weight: 45.0 lb.
Comet Premium TW 8030S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 8.7 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Weight: 45.0 lb.
Comet Premium TW 8030S Series Triplex Plunger Hot Water Pump with Kevlar Seals. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Hot Water Pump with Kevlar Seals
Specifications
• Max. Volume: 8.7 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Weight: 45.0 lb.
Comet Premium TW 10025S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 10.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Weight: 45.0 lb.
Comet Premium TW 11025S Series Triplex Plunger Hot Water Pump with Kevlar Seals. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Hot Water Pump with Kevlar Seals
Specifications
• Max. Volume: 11.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Weight: 45.0 lb.
Comet Premium TW 7036S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 7.0 GPM
• Max. Discharge Pressure: 3,600 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Weight: 45.0 lb.
Comet Premium TW 8036S Series Triplex Plunger Hot Water Pump with Kevlar Seals. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Hot Water Pump with Kevlar Seals
Specifications
• Max. Volume: 8.6 GPM
• Max. Discharge Pressure: 3,600 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Weight: 45.0 lb.
Comet Premium TW 8040S Series Triplex Plunger Pump. This solid shaft 30mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 8.6 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Weight: 45.0 lb.
Comet Premium TW 4570S Series Triplex Plunger Pump. This solid shaft 30mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 4.3 GPM
• Max. Discharge Pressure: 7,300 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Weight: 45.0 lb.
Comet Premium TW 5070S Series Triplex Plunger Pump. This solid shaft 30mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 5.3 GPM
• Max. Discharge Pressure: 7,300 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Weight: 45.0 lb.
Comet Premium TW 5570S Series Triplex Plunger Pump. This solid shaft 30mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 5.8 GPM
• Max. Discharge Pressure: 7,300 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Weight: 45.0 lb.
Comet Premium TW 4070S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 3.9 GPM
• Max. Discharge Pressure: 7,300 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Weight: 45.0 lb.
Comet Premium TW 4070S Series Triplex Plunger Pump. This solid shaft 30mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 7,300 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 30mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Weight: 45.0 lb.
Comet Premium TW 3570S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 3.4 GPM
• Max. Discharge Pressure: 7,300 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Weight: 45.0 lb.
p
Comet 4,000 PSI Quick Connect 2.5" Pressure Gauge Kit. It can be easily put in line with the quick connect ends and used to monitor/set/test your pressure washer
Specifications:
• Accurately view pressure for all units up to 4,000 PSI
• Casing: 2-1/2" Diameter
• Window: Acrylic
• Case Material: Stainless steel
• Fill Material: Glycerin (liquid)
• 3/8 Quick connects for easy mounting
• Max. Pressure: 4,000 PSI
• Weight: 0.80 lbs
Kit Components:
• 4,000 PSI 2.5” stainless steel pressure gauge
• 4,000 PSI Brass and stainless steel 3/8” quick disconnect gauge fitting
• Note: Assembly with Teflon tape is required
Comet Pump 18” pressure washer zinc plated extension wand with 22mm-14 male twist connect inlet & 1/4” QC socket outlet
Specifications
• Length: 18"
• Pipe: 1/4” Zinc plated steel
• Inlet: 22mm-14 Male twist connect
• Outlet: 1/4" Female Quick Connect Socket
• Max Pressure: 4,000 PSI
• Max Flow: 10.5 GPM
• Max Temp: 300° F.
• Weight 0.85 lbs
Comet Premium TWS 8035S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 8.3 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 3/4" FPT
• Outlet Ports: 1/2" FPT
• Weight: 45.0 lb.
Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings
Specifications:
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 3,000 PSI
• Solid Shaft for Belt or Gear Drive
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 7.5 BHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Weight: 19.6 lb
Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings
Specifications:
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 3,000 PSI
• Solid Shaft for Belt or Gear Drive
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 15.0 GHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Weight: 19.4 lb
Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings
Specifications:
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 1-1/8” Hollow
• Max. Horsepower Requirements: 7.5 EHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Weight: 20.3 lb
Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings
Specifications:
• Max. Volume: 5.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Solid Shaft for Belt or Gear Drive
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 18.18 GHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Weight: 19.6 lb
5 pc Fitting Kit - Bayonet & Twist Style. Includes 4 of the most common styles of bayonet fittings and one 22mm twist connect fitting
Fittings:
• Bosch bayonet style pressure washer fitting
• Lavor bayonet style pressure washer fitting
• KEW / Alto bayonet style pressure washer fitting
• 22mm-14 Twist coupler plug - Briggs Power Products, Brute, Craftsman, Delta, DeVilbiss, Excell, Generac, John Deere, Karcher, Ryobi, Troy-bilt
• Karcher K Series brass bayonet style pressure washer fitting
Specifications:
• Material: Brass
• Inlet: 1/4” Female NPT
• Max Pressure: 2,000 PSI
• Max Flow: 8.0 GPM
• Max Temp: 140° F
• Weight: 0.75 lb
Comet Water Seal Kit AWD, AWD-K, BWD & BWD-K
Comet Check Valve Kit
AWD-K 3030G, AWD-K 3530G, AWD-K 4030G, AWD-K 4036G
BWD-K 2527G, BWD-K 3027G
ZWD-K 3538G, ZWD-K 4042G, ZWD-K 4042S
Replaces 5025.0049.00
Specifications
• Size: 3/8” QC plug x 22mm-14 twist female adapter
• 4,000 PSI max. pressure
• 10.0 GPM max. flow
Comet Premium TWS 5550S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers
Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals
Specifications
• Max. Volume: 5.6 GPM
• Max. Discharge Pressure: 5,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Weight: 45.0 lb.
Comet BWD-K 3027G, BWD 3027 G-K Commercial Duty triplex plunger pump with adjustable unloader & chemical injection
Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In adjustable Uniflow unloader and chemical injector
• Double Seal Packings (High & Low)
• Anodized Crankcase
• Ceramic Plungers
• Forged Brass Manifold
• Stainless Steel Check Valves
• 1/2” FPT Inlet – 3/8” MPT Outlet
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway
Specifications:
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 7.36 GHP
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" Male NPT
• Auxiliary Port: 3/8" Female
• Weight: 13.1 lb.
Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In uniflow unloader with chemical injector standard
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,700 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway
Specifications:
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.2 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (1): 3/4" GH (garden hose)
• Discharge Ports (1): 3/8" MPT
• Forged brass head
• Stainless steel plungers
• Weight: 13.0 lb.
Comet BXD 3020G, BXD3020G Commercial-Duty Axial Pump with adjustable unloader & chemical injection
Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In adjustable Uniflow unloader and chemical injector
• Max. Volume: 2.8 GPM
• Max. Discharge Pressure: 2,000 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway
Specifications:
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 5.1 GHP
• Built-In easy start
• Double sealing system
• Stainless steel plungers
• Stainless steel check valves
• Steel shaft with built-in key
• Easy view oil level sight glass
• Forged brass manifold
• Patent registered ball bearing design
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" Male NPT
• Auxiliary Port: 3/8" Female
• Weight: 11.0 lb.
Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Max. Volume: 3.3 GPM
• Max. Discharge Pressure: 2,200 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway
Specifications:
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.6 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (1): 3/4" GH (garden hose)
• Discharge Ports (1): 3/8" MPT
• Forged brass head
• Ceramic plungers
• Built-In uniflow unloader with chemical injector standard
• Weight: 13.0 lb.