Annovi Reverberi - AR North America

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 5/8” Hollow
• Minimum Horsepower Requirements: 4.5 BHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 9.0-11.0 lb

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Minimum Horsepower Requirements: 4.5 BHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 9.0-11.0 lb

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 4.5 BHP
• Max. Fluid Temp.: 160 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces XTA3G16N & XTA3G19N
• Weight: 11.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 3/4" Solid
• Maximum Horsepower Requirements: 5.0 BHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 14.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.96 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 5.5 BHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 14.0 lb.

Annovi Reverberi 185º Hot Water Triplex Plunger Pump. Designed for a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• Manifold: Nickel plated forged brass.
• Plungers: Special thick solid ceramic for long life, strong durability and more resilience.
• Bearings: Oversized tapered roller bearing for maximum life and load disbursement.
• Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation.
• Valve, Seat and Springs: Stainless steel with specially designed ultra form material.
• Seals and V-Packing: 185º Viton high temperature machined.
• Plunger Rods: High strength stainless steel construction.
• Connecting Rods: One-piece bronze for higher pressure, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.

Specifications
• Max. Volume: 3.96 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 5.5 BHP
• Max. Fluid Temp.: 185º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

Annovi Reverberi / AR North America RK N Version Pump with 24mm solid shaft and 1,450 RPM. Used in a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems

Features
• They are constructed of die-cast bodies and feature a nickel plated forged brass head
• Internal components include special thick solid ceramic plungers for long life and durability
• Precision cast cooling fins are anodized for maximum heat dissipation
• Oversized tapered roller bearings and the precision supports assure proper shaft alignment and maximum life
• Valve cages of special designed Ultra-Form provide positive seating and extended life
• One-piece connecting rods are oversized for strength and load disbursement

Specifications
• Max. Volume: 6.34 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 11.0 EBHP
• Max. Fluid Temp.: 140º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 20.0 lb.

Annovi Reverberi / AR North America RR N Version with 24mm solid shaft series pumps are designed to belt drive or gear drive on gas engines and belt drive or flange coupling on electric motors. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RR is a result of our combined 60 years of pumps building experience and expertise

Features:
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications:
• Max. Volume: 4.8 GPM
• Max. Discharge Pressure: 2,320 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 7.6 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 13.35 oz
• Weight: 17.0 lb.

This Annovi Reverberi / AR North America RMW2.2G24-EZ-SX, RMW22G24-EZ-SX aluminum vertical plunger pump will pump up to 2.2 GPM at 2,400 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ).

Features:
• 3-Piston alternating volumetric pumps for use on cleaning units
• Check the HOLE in the ARM location relative to the inlet/outlet Port (2nd Picture)
• This SX pump is Back Mounted - 180º rotated shaft configuration (3rd picture)
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in aluminum
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.2 GPM
• Max. Discharge Pressure: 2,400 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Maximum Horsepower Requirements (Industrial): 4.8 GHP
• Maximum Horsepower Requirements (Standard): 5.9 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 7.3 lb.

 

This Annovi Reverberi / AR North America RMW2.2G24-EZ, RMW22G24-EZ aluminum vertical plunger pump will pump up to 2.2 GPM at 2,400 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve, and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ).

Features:
• 3-Piston alternating volumetric pumps for use on cleaning units
• Check the HOLE in the ARM location relative to the inlet/outlet Port (2nd Picture)
• This pump is Front Mounted (3rd picture)
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in aluminum
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.2 GPM
• Max. Discharge Pressure: 2,400 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Maximum Horsepower Requirements (Industrial): 4.8 GHP
• Maximum Horsepower Requirements (Standard): 5.9 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 7.3 lb.

 

>

This Annovi Reverberi / AR North America RMV2.5G24D / RMV25G24D horizontal plunger pump. 2.5 GPM at 2,400 PSI, spins at 3,400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 3/4” shaft 4 - 7 HP engines. The hollow shafted pump includes a built-in pressure control valve and chemical injection system. Comes with Thermal Relief Valve and Easy Start Valve (EZ)

Features:
• 3-Piston alternating volumetric pumps for use on cleaning units
• Can be directly coupled to gas engine flange
• Fits most homeowner type horizontal pressure washers
• Horizontal Mount with Gas Flange 3-6 HP (2-9/16 center to center)
• Pump body in die-cast aluminum alloy
• Pistons driven by swash plate mechanism
• Two bearing systems, to support the pump shaft and pistons
• Pistons in hardened and tempered steel
• Pump head in aluminum
• Double gasket sealing system
• Intake valves fitted above the pistons for greater efficiency
• Integral regulating valve
• Integral detergent suction system

Specifications:
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,400 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 5.45 GHP
• Inlet Port: 3/4" GHA (garden hose)
• Outlet Port: 22mm-14 (Twist Connect)
• Weight: 4.65 lb.

 

This Annovi Reverberi / AR North America RMW2G25D, RMW 2G25D series plunger pump will pump up to 2.0 GPM at 2,500 PSI. Vertical Radial-Axial series replacement pump (Mounts under the engine). The hollow shafted pump includes a built-in pressure control valve and chemical injection system

Features:
• Check the HOLE in the ARM location relative to the inlet/outlet Port (2nd Picture)
• Fits most homeowner type vertical pressure washers with Front Mounted Pump (see 3rd image)
• NOTE: This Pump DOES NOT fit Karcher units using a hex head bolt to drive the pump.

Specifications:
• Vertical Mount with Gas Flange 3-7 HP
• Note: This pump is Front Mounted
• Max. Volume: 2.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Built In unloader and chemical injector
• Maximum Horsepower Requirements: 4.5 GHP
• Inlet Port: 3/4" FGH (garden hose)
• Outlet Port: 22mm (Twist Connect)
• Auxiliary Port: 1/4” FPT
• Brass manifold
• Stainless steel plungers
• Pump comes with oil
• See optional items below or in our store
• Note: Engine shafts longer that 2” will require spacers or washers
• Weight: 7.7lb.

This Annovi Reverberi / AR North America RMV 2G25D series plunger pump will pump up to 2.0 GPM at 2,500 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 3/4” shaft 1.1 - 6.8 HP engines. The hollow shafted pump includes a built-in pressure control valve and chemical injection system

Specifications
• Fits most homeowner type horizontal pressure washers
• Horizontal Mount with Gas Flange 3-6.8 HP (2-9/16 center to center)
• Max. Volume: 2.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 6.82 GHP
• Inlet Port: 3/4" FGH (garden hose)
• Outlet Port: 22mm (Twist Connect)
• Built In unloader and chemical injector
• Brass manifold
• Stainless steel plungers
• Replaces RMV2G20D
• Weight: 7.5 lb.

Annovi Reverberi / AR North America RCV E Version with F8 flange series pumps are designed to direct drive on electric NEMA 56 C motors ranging from 1.5 – 6.0 HP. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCV is a result of our combined 60 years of pumps building experience and expertise

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 2.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 3.4 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

Annovi Reverberi / AR North America RCV E Left Handed Version with F8 flange series pumps are designed to direct drive on electric NEMA 56 C motors ranging from 1.5 – 6.0 HP. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCV is a result of our combined 60 years of pumps building experience and expertise

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 2.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 5/8” Hollow
• Drive Side: Left
• Max. Horsepower Requirements: 3.4 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.

This Annovi Reverberi / AR North America RMW25G25D, RMW 2.5G25D series plunger pump will pump up to 2.5 GPM at 2,500 PSI. Vertical Radial-Axial series replacement pump (Mounts under the engine). The hollow shafted pump includes a built-in pressure control valve and chemical injection system

Features:
• Check the HOLE in the ARM location relative to the inlet/outlet Port (2nd Picture)
• Fits most homeowner type vertical pressure washers with Front Mounted Pump (see 3rd image)
• NOTE: This Pump DOES NOT fit Karcher units using a hex head bolt to drive the pump.

Specifications:
• Vertical Mount with Gas Flange 3-7 HP
• Note: This pump is Front Mounted
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 7/8” Hollow
• Built In unloader and chemical injector
• Maximum Horsepower Requirements: 5.8 GHP
• Inlet Port: 3/4" FGH (garden hose)
• Outlet Port: 22mm (Twist Connect)
• Auxiliary Port: 1/4” FPT
• Brass manifold
• Stainless steel plungers
• Pump comes with oil
• See optional items below or in our store
• Note: Engine shafts longer that 2” will require spacers or washers
• Weight: 7.7lb.

Annovi Reverberi / AR North America RCA N Version with 24mm solid shaft series pumps are designed to belt drive or gear drive on gas engines and belt drive or flange coupling on electric motors. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCA is a result of our combined 60 years of pumps building experience and expertise

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 4.3 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 10.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 5.0 BHP
• Max. Fluid Temp.: 140 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 14.0 lb.

Annovi Reverberi 185º Hot Water Triplex Plunger Pump. Designed for a wide variety of high pressure washing applications. These pumps are designed for gearbox , belt drive, or coupling drive systems driven by electric motor or gasoline driven systems, gasoline engine driven systems
 

Features:
• Manifold: Nickel plated forged brass.
• Plungers: Special thick solid ceramic for long life, strong durability and more resilience.
• Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side.
• Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation.
• Valve, Seat and Springs: Stainless steel with specially designed ultra form material.
• Seals and V-Packing: 185º Viton high temperature machined.
• Plunger Rods: High strength stainless steel construction.
• Connecting Rods: One-piece bronze special alloy aluminum based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.

Specifications:
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Maximum Horsepower Requirements: 5.0 BHP
• Max. Fluid Temp.: 185º F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Standard right
• Weight: 14.0 lb.

Annovi Reverberi / AR North America RCA E Version with F8 flange series pumps are designed to direct drive on electric NEMA 56 C motors ranging from 1.5 – 6.0 HP. Intended use for heavy tasks; this triplex plunger pump features the latest in design and technology. Life tested over 2,000 hours at maximum performance. The RCA is a result of our combined 60 years of pumps building experience and expertise

Features
• Latest in design and technology
• New crankcase style
• High strength forged brass manifold for long term use
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Stainless steel valves
• Side mount valve seat o-rings
• High quality high pressure seals
• NEW low pressure seal with built in scraper
• Two piece piston guides
• NEW connecting rod with 12% more load surface
• Large side cover sight glass
• Oversized bearings
• Rear cover oil drain
• Forged, precision ground crankshaft

Specifications
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 5.1 EBHP
• Max. Fluid Temp.: 140° F.
• Inlet Ports (2): 1/2" Female
• Outlet Ports (2): 3/8" Female
• Oil capacity: 9.81 oz
• Weight: 11.0 lb.