Fairview USA Inc.

Fairview QD-GMN8-8F GAS-FLO™ 1/2” Nipple x 1/2” FPT LPG/Nat. Gas Quick Disconnect. Fairview's CSA LPG/Nat. Gas Nipples are CSA Certified up to 60 PSI WP

Features:
• C.S.A. GAS INTERCHANGE QUICK DISCONNECTS (QD-GMC)
• CSA certified to Z21.41/CSA6.9 for Natural Gas and LP-Gas – air mixtures
• QD-GMC Quick Disconnects Rated To 60 P.S.I.
• QD-GMC Sizes 1/4, 3/8, 1/2 & 3/4 Quick Disconnects Are Rated To A Temperature -40°F

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Nipple (Body Size): 1/2
• Female Pipe Thread: 1/2
• Quick Disconnect BTU Capacity: 120,000
• Material: Brass
• Weight: 2.8 oz

Fairview GAS-FLO™ BV5042-8 1/2" Flare Tube Forged Full Port Brass Ball Valve 600 WOG. Fairview's Brass Flare Union Gas Cocks are CSA certified to 5 P.S.I. (-40°) from the appliance to the meter

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Features:
• For Indoor/Outdoor applications. C.S.A. Certified forged brass ball valves for Natural and Propane Gas (vapor)
• Brass valves for use in W.O.G. = Water, Oil and Gas 
• Full Port
• Blowout-Proof Stem
• PTFE Seats
• CSA certified to 5 P.S.I. FROM APPLIANCE TO METER

Specifications:
• W.O.G: 600
• Flare Tube Size: 1/2”
• Connection Type: Flare Tube to Flare Tube
• Materials: Aluminum, Brass, NBR, PTFE, Steel
• Operating temperature: -40°F to +125°F (-40°C to +52°C)
• Weight: 0.30 lbs

Fairview GAS-FLO™ BV5046-8D 1/2" Flare Tube to 1/2” FPT Forged Full Port Brass Ball Valve 600 WOG. Fairview's Brass Flare To Female Pipe Gas Cocks are CSA certified and built specially for use with Stationary Appliance Connectors

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Features:
• For Indoor/Outdoor applications. C.S.A. Certified forged brass ball valves for Natural and Propane Gas (vapor)
• Brass valves for use in W.O.G. = Water, Oil and Gas 
• Full Port
• Blowout-Proof Stem
• PTFE Seats
• CSA certified to 5 P.S.I. FROM APPLIANCE TO METER

Specifications:
• W.O.G: 600
• Flare Tube Size: 1/2”
• Pipe Size: 1/2” FPT
• Connection Type: Flare Tube to Female
• Materials: Aluminum, Brass, NBR, PTFE, Steel
• Operating temperature: -40°F to +125°F (-40°C to +52°C)
• Weight: 0.26 lbs

Fairview GAS-FLO™ BV5048-8D 1/2" Flare Tube to 1/2” MPT Forged Full Port Brass Ball Valve 600 WOG. Fairview's Brass Flare To Female Pipe Gas Cocks are CSA certified and built specially for use with Stationary Appliance Connectors

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Features:
• For Indoor/Outdoor applications. C.S.A. Certified forged brass ball valves for Natural and Propane Gas (vapor)
• Brass valves for use in W.O.G. = Water, Oil and Gas 
• Full Port
• Blowout-Proof Stem
• PTFE Seats
• CSA certified to 5 P.S.I. FROM APPLIANCE TO METER

Specifications:
• W.O.G: 600
• Flare Tube Size: 1/2”
• Pipe Size: 1/2” MPT
• Connection Type: Flare Tube to Male
• Materials: Aluminum, Brass, NBR, PTFE, Steel
• Operating temperature: -40°F to +125°F (-40°C to +52°C)
• Weight: 0.28 lbs

Fairview QD-GMRVC4-4F GAS-FLO™ 1/4” Ball Vale Coupler x 1/4” FPT CSA RV Gas Quick Disconnect. Fairview's Recreational Vehicle Valved Gas QD’s are CSA Certified up to 60 PSI WP

Features:
• C.S.A. (C.G.A. / A.G.A.) design certified for natural gas and L.P. gas - air mixtures
• For quick connect and disconnect of LP gas hose to camper/RV cooking stoves

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Coupler (Body Size): 1/4
• Female Pipe Thread: 1/4
• Material: Brass
• Weight: 4.2 oz

Fairview GAS-FLO™ 1/4” ID x 12” AOL Type 1 Thermoplastic Propane Hose Assembly with 1/4” Male Inverted Flare x POL Fittings. Fairview's Type 1 Thermoplastic POL Pigtails are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 12” (Tolerance ± 1/4 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass Male Inverted Flare
• End: POL
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.30 lbs

Fairview GAS-FLO™ 1/4” ID x 12” AOL Type 1 Thermoplastic Propane Hose Assembly with 1/4” Male Inverted Flare x QCC Fittings. Fairview's Type 1 Thermoplastic QCC Pigtails are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 12” (Tolerance ± 1/4 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass Male Inverted Flare
• End: QCC1 ACME
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.30 lbs

Fairview GAS-FLO™ 1/4” ID x 120” AOL Type 1 Thermoplastic Propane Hose Assembly with 3/8” 45° SAE Female Swivel Flare x 3/8” 45° SAE Female Swivel Flare Fittings. Fairview's Type 1 Thermoplastic F.SAE Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 120” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 3/8” Brass 45° SAE Female Swivel Flare
• End: 3/8” Brass 45° SAE Female Swivel Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.95 lbs

Fairview GAS-FLO™ 1/4” ID x 120” AOL Type 1 Thermoplastic Propane Hose Assembly with 1”-20 Swivel Male Cylinder Thread x QCC1 Fittings. Fairview's Type 1 Thermoplastic MC X QCC Assemblies are CSA certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 120” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Hose Color: Black
• Max Pressure: 350 PSI
• End: 1”-20 Swivel Male Cylinder Thread
• End: Black QCC1 ACME
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.20 lbs

Fairview GAS-FLO™ 1/4” ID x 15” AOL Type 1 Thermoplastic Propane Hose Assembly with 1/4” Male Inverted Flare x QCC Fittings. Fairview's Type 1 Thermoplastic QCC Pigtails are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 15” (Tolerance ± 1/4 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass Male Inverted Flare
• End: QCC1 ACME
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.30 lbs

Fairview GAS-FLO™ 1/4” ID x 18” AOL Type 1 Rubber Propane Hose Assembly with 1/4” Male Inverted Flare x POL Fittings. Fairview's Type 1 Rubber POL Pigtails are CSA Certified to 350 PSI WP -60°F To 212°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 18” (Tolerance ± 1/4 of an inch)
• Temperature: -60°F to +212°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass Male Inverted Flare
• End: POL
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.35 lbs

Fairview GAS-FLO™ 1/4” ID x 36” AOL Type 1 Thermoplastic Propane Hose Assembly with 3/8” 45° SAE Female Swivel Flare x 3/8” 45° SAE Female Swivel Flare Fittings. Fairview's Type 1 Thermoplastic F.SAE Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 36” (Tolerance ± 1/4 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 3/8” Brass 45° SAE Female Swivel Flare
• End: 3/8” Brass 45° SAE Female Swivel Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.40 lbs

Fairview GAS-FLO™ 1/4” ID x 48” AOL Type 1 Thermoplastic Propane Hose Assembly with 1/4” Male Pipe x RV QD Nipple Fittings. Fairview's Type 1 Thermoplastic RVQD Extension Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 48” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass Male Pipe
• End: 1/4” Brass RV QD Nipple
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.40 lbs

Fairview GAS-FLO™ 1/4” ID x 48” AOL Type 1 Thermoplastic Propane Hose Assembly with RV QD Coupler x QD Nipple Fittings Fairview's Type 1 Thermoplastic RV Outside Appliance Quick Disconnect Hoses are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 48” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass RV QD Coupler
• End: 1/4” Brass RV QD Nipple
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.60 lbs

Fairview GAS-FLO™ 1/4” ID x 60” AOL Type 1 Thermoplastic Propane Hose Assembly with 1”-20 Swivel Male Cylinder Thread x QCC1 Fittings. Fairview's Type 1 Thermoplastic MC X QCC Assemblies are CSA certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 60” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Hose Color: Black
• Max Pressure: 350 PSI
• End: 1”-20 Swivel Male Cylinder Thread
• End: Black QCC1 ACME
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.80 lbs

Fairview GAS-FLO™ 1/4” ID x 72” AOL Type 1 Thermoplastic Propane Hose Assembly with 3/8” 45° SAE Female Swivel Flare x 3/8” 45° SAE Female Swivel Flare Fittings. Fairview's Type 1 Thermoplastic F.SAE Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 72” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 3/8” Brass 45° SAE Female Swivel Flare
• End: 3/8” Brass 45° SAE Female Swivel Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.65 lbs

Fairview GAS-FLO™ 1/4” ID x 96” AOL Type 1 Thermoplastic Propane Hose Assembly with 1/4” Male Pipe x RV QD Nipple Fittings. Fairview's Type 1 Thermoplastic RVQD Extension Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 96” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass Male Pipe
• End: 1/4” Brass RV QD Nipple
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.75 lbs

Fairview GAS-FLO™ 1/4” ID x 96” AOL Type 1 Thermoplastic Propane Hose Assembly with RV QD Coupler x QD Nipple Fittings Fairview's Type 1 Thermoplastic RV Outside Appliance Quick Disconnect Hoses are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 96” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass RV QD Coupler
• End: 1/4” Brass RV QD Nipple
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.95 lbs

Fairview QD-GMRVN4-4M GAS-FLO™ 1/4” Nipple x 1/4” MPT CSA RV Gas Quick Disconnect. Fairview's Recreational Vehicle Gas QDs are CSA Certied up to 60 PSI WP

Features:
• C.S.A. (C.G.A. / A.G.A.) design certified for natural gas and L.P. gas - air mixtures
• Full flow plug for quick connect and disconnect of R.V. style coupler

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Nipple (Body Size): 1/4
• Male Pipe Thread: 1/4
• Material: Brass
• Weight: 1.0 oz

Fairview GAS-FLO™ CP-2412 1/4” OD x 12” Short Nose POL x 1/4 MPT Copper Propane Gas Pigtail. Fairview's Short POL To 1/4 MPT Copper pigtails are ideal for use with Propane Gas

Applications:
• Propane gas copper pigtails and hogtails provide a flexible connection between the container valve and the regulator
• Solder connections Copper tube for PIGTAILS is 1/4" O.D. by .049 WALL
• Usage depends on application and requirements
• With soldered ends and a wide selection of connections and lengths

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Tube OD: 1/4”
• Approx. Length: 12”
• Tube Material: Copper
• End: Short Nose P.O.L
• End: 1/4 MPT
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.30 lbs