Fimco Spare Parts

• Fimco Optional Accessorie for 3 Point Sprayers
• Hypro 6 roller pump with 1320-0022 coupler
• 540 RPM

• Fimco replacement wet boom assembly
• Includes boom tube, 3 nozzles & 2 grommets

The FIMCO 5275918 12V DC Variable Motor Speed Control Kit contains motor controller, motor controller motor cable and motor controller battery cable. Kit allows user control of the motor speed and control of the spread width from 5-45 feet. Can be used with 12V motors up to 10 AMPS. This replacement variable motor speed control kit can be used with FIMCO Dry Material Spreaders.

Product Features:
• 12V DC Variable Motor Speed Control Kit
• 20 foot wire harness with alligator clips
• Use with 12V motors up to 10 Amps
• OEM replacement part

AA144A-1 DirectoValve® control valve is a 2-way control for all spray equipment where 12-volt DC power is available. It has a polypropylene valve body with stainless steel parts that provides excellent corrosion resistance and has and a 3/4" inlet and 1/2" outlet. The polypropylene body coil can be changed without removing the valve from the manifold. It is designed to provide remote on/off boom control and this 12 V direct-acting valve has large internal flow chambers to reduce clogging and has a maximum working pressure of 100 psi

• Fimco 2” receiver hitch adapter
• Allows the use of receiver hitches on vehicle to attach ATV-DMS-12V Dry Material Spreader

The TeeJet TeeValve Manual Selector Control Valve allows user to open any three boom section lines in any desired combination. Raise and lower lever to open and close the valve without changing the indexed position. The aluminum construction with stainless steel and plastic internal parts offers maximum corrosion resistance. Built as a replacement TeeValve Manual Selector Control Valve for some FIMCO 3 Point Sprayers

Provides on/off control of a 3-section spray boom; left, center and right sections

Seven indexed positions for any possible combination; L, R, C, LC, LR, LCR and OFF

Fits FIMCO 110-300 gallon 3 point sprayers

The FIMCO 5157208 12V-10A Motor Controller for Dry Material Spreader has on/off switch and variable speed dial. Allows user to control the spread of width from 5 - 45 feet. This replacement motor controller can be used with FIMCO Dry Material Spreaders

Product Features:
• Controller only for FIMCO dry material spreaders
• OEM replacement part

 

18X850-8,4-PLY K500 KENDA SUPERTURF TIRE MOUNTED ON

• Fimco 1-1/4” receiver hitch adapter
• Allows the use of receiver hitches on vehicle to attach ATV-DMS-12V Dry Material Spreader

The FIMCO 5275840 12V 5/16" Diameter Shaft Motor for Dry Material Spreaders is easy to install with the integral mounting studs. Replacement motor for all FIMCO Dry Material Spreaders.

Product Features:
• 12V motor for FIMCO dry material spreaders
• OEM replacement part

FIMCO 5275713 Complete Replacement Boomless Nozzles Left and Right (Pkg of 2)

• The FIMCO Complete Replacement Boomless Nozzle offers increased capacity with precise liquid application
• The polyacetal nozzle offers an on/off valve and tip
• Built to replace end nozzle on wet boom 3 nozzle FIMCO Sprayers
• Package of 2 Fimco # 5275122 end nozzles

Volt Edge 20V Battery Receiver 15A

Fimco Industries VOLT EDGE™ 20V-5.0AH-BAT. The Volt Edge 20V Replacement Battery represents a major step in 21st Century Lithium Ion Battery powered technology. Designed to extend your spraying time with a spare 20 Volt 5.0 Amp Hour Battery, this is an OEM interchangeable battery for Volt Edge sprayers and conversion kits. Innovation is everything and the Volt Edge Conversion Kit delivers the consistency, power and performance you need to get your work done

Features:
• 20 Volt Lithium Ion Battery provides on demand power when you need it most
• 5.0 amp hour battery can deliver up to 60 minutes of use spraying 60 gallons of liquid per charge

Specifications:
• Warranty: 1 yr Consumer / 90 day Commercial
• Power Supply: Lithium Ion Battery
• Compatible with the VOLT EDGE™ wireless battery system only
• Battery Pack 5164275
• Weight: 1.60 lbs

Volt Edge 20V 1A Lithium Battery Charger

The FIMCO 5160003 Stainless Steel Dry Material Spreader Spinner controls the material being spread. It connects to the Pattern Adjusting Ring Weldment and the motor through the Motor Spindle to provide the spinning motion.

Product Features:
• Fits FIMCO dry material spreaders
• OEM replacement part

Fimco LAWN GUARD Lithium Ion Battery Powered Rechargeable Handgun / Pump. Easily Convert Your Pump Up Style Sprayer for Effortless Spraying. Roundup® Ready

Features;:
• No More Pumping – Rechargeable Lithium Ion Battery Diaphragm Pump Handgun
• 65 Minute Run Time
• Adjustable Nozzle From Straight Stream To Mist

Specifications:
• Flow: 0.2 GPM
• Vertical Spray Distance: 10’
• Horizontal Spray Distance: 20’
• Capacity: 13 Gallons per charge
• Run Time: 65 Minutes per charge
• Recharge TIme: 2.5 Hour
• Battery Charger: 3.6V
• Warranty: 1 Year (*90 DAY COMMERCIAL WARRANTY)
• Note: Sprayer & hose not included
• Weight: 2.25 lbs

Blue Boom Extender Tip

Fimco Lower Valve Sub-Assembly for 5275260

FThe Pump Head for 2.4 High Flo Demand 12V Pump is the complete pump head which includes drive and valve assemblies and the diaphragm/piston/cam/bearing kit

• Fimco Model #: HFP-24060-113
• Fimco Pump #: 5281371, 5151087
• Replaces Fimco # 5168837

Switch & Wire Assembly for on-off control of one solenoid shutoff valve. Includes on-off switch with 8’ battery power core and 8’ wires with connectors for solenoid valve.