General Pump PMRPULSAR4KHPEZ- Unloader and Kit 4,050 PSI 10.5 GPM
Features• PULSAR4KHPEZ Unloader, 4050 PSI, 10 GPM• 3/8" Quick Coupler and 3/8" Plug Included • 3/4" Garden Hose Inlet Fitting with 1/4" Side Port• 3/8" Hose Barb and Clamp Keeps Hose Secure and Sealed• Flow through design• General Pump recommends installing a secondary relief and pressure gauge
Specifications Sheet
Specifications• Maximum Temperature: 195° F• Max GPM: 10.5• Maximum PSI: 4,050• Inlet: (2) 3/8" NPT-F• Outlet: 3/8" NPT-F• Bypass (2) 3/8" NPT-F• Weight: 3.15 Lbs
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
PA PR16 / General Pump YPRESSWITCH 5,000 PSI Pressure Switch with 580 PSI (Black) activation and 1/4" NPT-M stainless steel inlet. Electro-mechanical device, which, upon reaching a pre-set pressure (580 PSI) , opens or closes an electrical control contact
Specifications• Activation (Black) PSI: 580• Max. Voltage: 250• Permissible Pressure: 5,000 PSI• Rated Temp: 165° F• Max. Curr. Strength: 16 (A) – resistive load - 6 (A) – inductive load • Electrical insulation: 55 IP• Connection Material: Stainless Steel• Cable Length: 47" (1200 mm)• Electric Wire: 3 x 1 mm• Inlet: 1/4" NPT-M• Weight: 6.56 oz.
Comet Premium Pump Oil (32 oz)
• For diaphragm and high pressure plunger pumps• Specially formulated non-detergent and non-foaming oil• Rated for superior rust and oxidation protection• Packaged in 32 oz bottles• Bottle Color: Black or White• Weight: 2.0 Lbs.
Comet Pump 1/2” MPT Solid Brass Inlet Water Filter with Garden Hose Inlet and 1/4” Return Port. The line strainer or filter was designed to remove debris and sediment from the water supply entering the pump. It will prolong the life of a high pressure pump to use a line strainer for any water supply.
Features• Inlet: 3/4" Female GHT• Outlet: 1/2" MPT• Return Port: 1/4" FPT• Max Flow: 10.5 GPM• Weight: 0.45 Lbs
General TS2021 Triplex Plunger Pump. The preferred pump frame in the pressure cleaning industry
Features:• Forged, nickel-plated, brass manifold with an exclusive lifetime warranty• Large-capacity, die-cast, anodized aluminum oil-bath crankcase• Over-sized connecting rods for maximum life• Heavy-duty tapered roller bearing • Solid ceramic plungers with continuously lubricated packings• Unitized stainless steel inlet and discharge valves
Specifications:• Triplex Plunger Pump• Solid Shaft for Belt or Gear Drive• Max. Volume: 5.6 GPM• Max. Discharge Pressure: 3,500 PSI• Max. Pump Speed: 1450 RPM• Shaft Diameter: 24mm Solid• Max. Horsepower Requirements: 18.0 GHP• Max. Fluid Temp.: 165° F.• Inlet Ports (2): 1/2-14 BSPP-F• Discharge Ports (2): 3/8-19 BSPP-F• Drive Side: Standard right• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation• Weight: 32.0 lb.