2,610 PSI 2.9 GPM General PMRET1506G6 Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box PUMP:• General ET1506G6 Pump with SAE J609A Gas Flange• Direct Drive with Gas Flange 5.0-7.0 HP SAE• Max. Volume: 2.9 GPM• Max. Discharge Pressure: 2,610 PSI • Max. Pump Speed: 3,400 RPM• Shaft Diameter: 3/4” Hollow• Max. Horsepower Requirements: 6.9 GHP • Max. Fluid Temp.: 165º F• New “HR” anti-corrosion surface treatment on manifold• Solid ceramic plungers COMPONENTS: • General ET1506G6 Triplex Plunger Pump• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM • Thermal relief valve• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port• 3/8” QC brass socket and 3/8” QC Plug Included• Mounting bolts• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted • Weight: 14.90 lb
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
General Pump DuraView Inlet Water Filter 1/2" MPT X 3/4 FGH. For general purpose pressure wash use
Features• Strongest see-through filter on the market• Loadbearing brass spine• Integrated garden hose connector• Flow through design• Clear plastic cover
Specifications• Maximum Temperature: 180° F• Max Volume: 8.0 GPM• Maximum Operating Pressure: 150 PSI• Minimum Operating Pressure: 15 PSI • Materials: Brass, Stainless Steel, Buna-N• Inlet: Female garden hose (FGH)• Outlet: 1/2” NPT-M• Bypass Ports: None• BE # 85.300.054• Dimensions: 1.125” x 3.75”• Weight: 1.50 Lbs
Comet 4,000 PSI Quick Connect 2.5" Pressure Gauge Kit. It can be easily put in line with the quick connect ends and used to monitor/set/test your pressure washer
Specifications:• Accurately view pressure for all units up to 4,000 PSI• Casing: 2-1/2" Diameter• Window: Acrylic• Case Material: Stainless steel• Fill Material: Glycerin (liquid)• 3/8 Quick connects for easy mounting• Max. Pressure: 4,000 PSI• Weight: 0.80 lbs
Kit Components:• 4,000 PSI 2.5” stainless steel pressure gauge• 4,000 PSI Brass and stainless steel 3/8” quick disconnect gauge fitting• Note: Assembly with Teflon tape is required