GP Handle Kit w/ Hardware, DHR & 2100357 Hose Reels
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
Repair kit for 2103241 and 2103240 Hose Reel Swivels for D30001, D30002, D30004 & D30006
General Pump #4.0 Quick Connect (Q) Spray Nozzle 5-Pack
Features• 5,000 PSI operating pressure• Made in the USA• Ceramic insert is resistant to wear• Through-hardened stainless steel orifices offer superior wear resistance compared to standard case hardened nozzles• Stainless steel housing resists cracking and wear• Resistant to most chemical• Large color coded tip protector on Q-type nozzles permits rapid identification of fan angle• Laser marked for clarity and durability
Specifications• Nozzle Size: 4.0• Contents: One each of a 0º, 15º, 25º, 40º and 65º #40 soap nozzle• Operating Pressure: 5,000 PSI• Connection: 1/4” QC Plug• Weight: 0.50 oz
Please use Nozzle Chart to determine proper nozzle size
Nozzle Chart
General Pump #2.1mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer
Features• 20% injection draw rate• Made in the USA• A cost effective solution to your chemical application needs
Injector Specifications:• Size: # 2.1 mm (3.0 to 5.0 GPM)• Max Operating Pressure: 4,500 PSI• Max Temperature: 195° F• Inlet: 3/8” NPT-M• Outlet: 3/8” NPT-M • Chemical Port: 1/4” Hose Barb• Materials: Brass, Stainless Steel, Viton • Note: If between sizes, choose the smaller injector size• Weight: 0.30 lbs
Features• High Quality, German engineered components• Easy-Pull™ is designed for operators and applications with high-volume of trigger cycling• The Easy-Pull™, German Engineered Technology reduces trigger pulling force by 60% compared to usual competitors spray gun• Easiest opening and holding trigger, requires nearly half the effort of the other rear-entry guns• Proper spray angle for optimal positioning of pressure points• Unitized valve for easy repair• Forged brass housing for maximum strength
Specifications • Max Pressure: 5,000 PSI• Max Flow: 12.0 GPM• Max Temp: 300° F.• Inlet: 3/8" Female NPT• Outlet: 1/4" Female NPT• Weight: 1.22 lb