We accept

Checkout

0
Picture of VRT3-310EZ Unloader Plumbing Kit - 4,495 PSI Max, EZ Start, Safety Relief

VRT3-310EZ Unloader Plumbing Kit - 4,495 PSI Max, EZ Start, Safety Relief

SKU: 88.0137

Brand: Mecline

$96.04

QTY:
ADD TO CART
ADD TO WISHLIST
Product Description


Mecline VRT310-EZ Unloader Plumbing Kit for Pressure Washer Pump with Safety Relief and EZ Start– 4,495 PSI Max. This unloader kit has all the components to make installation easy


Specifications:
• Works with pumps that have 1/2” FPT inlet and 3/8” FPT Outlet
• Safety relief vale protects equipment and people with adjustable “Pop Off” protection
• Built-In easy start valve relieves back pressure during engine start up
• Maximum Pressure: 4,495 PSI
• Max. Volume: 8.0 GPM


COMPONENT:
• Mecline VRT3-310EZ Adjustable Unloader Valve 4,500 PSI with EZ Start
• GP Safety pressure relief valve with adjustable range: 1,000 - 6,000 PSI
• 3/8” Steel street elbow
• 24” of push-on bypass hose
• 1/4” Male push on fitting
• 3/8” Male push-on fitting
• 3/8M x 3/8M Hex Nipple Steel
• GP Thermal relief valve protects pump from overheating
• GP Duraview water inlet filter with garden hose connection
• 3/8” QC socket
• 3/8” QC plug
• Roll of Teflon tape
Note: Pump in 2nd picture is not included and kit may look different than shown in picture
• Unloader Must Be Installed Vertically For Proper Operation

• Weight: 5 lb

 WARNING:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.

Customers who bought this item also bought

Plastic Chemical Filter W/O Check Valve

SKU: CF-BLKSS


• Larger & heavier than most filters on the market
• Corrosion-resistant plastic
• 1/4" hose barb
• Weighted to stay on the bottom

  Price: $1.68

QD Plug, Hardened Steel Zinc Plated 1/4 x 1/4 NPT-F 5,000 PSI

SKU: D11006


General Pump D11006 Quick Disconnect Coupler Plug Hardened Steel Zinc Plated 1/4” x 1/4" NPT-F 5,000 PSI


Features:
• Quick disconnect design
• Hardened Steel Zinc Plated


Specifications:
• Quick Disconnect Coupler: Plug
• Body Material: Hardened Steel
• Plug Size: 1/4"
• Thread: 1/4” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Replaces QCP1FS
• Weight: 0.06 lb

 

Nominal Thread Size (NPT)
1/8"
1/4"
3/8"
1/2"
3/4"
1"
Actual I.D. Measurement
3/8"
1/2"
5/8"
3/4"
1"
1-3/8"
  Price: $0.79

QD Socket, Brass 1/4 x 1/4 NPT-F 5,000 PSI

SKU: D10001


General Pump D10001 Quick Disconnect Coupler Socket Brass 1/4” x 1/4" NPT-F 5,000 PSI


Features:
• Quick disconnect design
• Brass
• EPDM O-Ring


Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: Brass
• Socket Size: 1/4"
• Thread: 1/4” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Replaces QCS1FB
• Weight: 0.15 lb

 

Nominal Thread Size (NPT)
1/8"
1/4"
3/8"
1/2"
3/4"
1"
Actual I.D. Measurement
3/8"
1/2"
5/8"
3/4"
1"
1-3/8"
  Price: $2.99

GP High Draw 20% Fixed Chemical Injector MxM #2.1

SKU: 100775


General Pump #2.1mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer


Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs


Injector Specifications:
• Size: # 2.1 mm (3.0 to 5.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

  Price: $11.02