1/4” Stainless Steel Cornering Sewer Jetter Nozzle, # 4.5. A single jet at 90 degrees to the two rear facing jets allows the hose to negotiate tight 90 degree bends or tees. This nozzle will get through bends that the other nozzles won't make.
Features• Side jet pushes hose thru bends and corners• 2 Backward jets drive nozzle forward and flushes and removes debris from sides of line• Corrosion resistant stainless steel construction
Specifications • Inlet: 1/4” FPT• Nozzle Size: # 4.5• Material: Stainless steel• Maximum Pressure: 4,000 PSI• Weight: 0.5 oz.
Please use Nozzle Chart to determine proper nozzle size
Nozzle Chart
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
Features• Forward jet breaks up clogs & debris• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line• Corrosion resistant stainless steel construction
Specifications • Inlet: 1/4” FPT• Nozzle Size: # 4.5• Material: Stainless steel• Maximum Pressure: 4,200 PSI• Max. Fluid Temperature: 300º F• Weight: 0.6 oz.
Specifications • Inlet: 1/8” FPT• Nozzle Size: # 4.5• Material: Stainless steel• Maximum Pressure: 4,000 PSI• Weight: 0.3 oz.
Specifications • Inlet: 3/8” FPT• Nozzle Size: # 4.5• Material: Stainless steel• Maximum Pressure: 4,200 PSI• Max. Fluid Temperature: 300º F• Weight: 1.4 oz.
ProPulse, a Schieffer Company, backed by more than 90 years of innovation
MADE IN USAEvery foot of Propulse Jetter Clean is manufactured at our ISO9001:2008 certified factory in the USA using 100% domestically sourced materials
Features:• Suitable for consumer and commercial applications• Reinforcement: One layer of polyester braid• Cover: Thermoplastic smooth finish with printed lay line• Burst (Minimum): 2.5:1 working pressure• Easily slides into sewer lines and pipes• Glossy black abrasion resistant cover
Specifications: • Inner Diameter: 1/4” ID• Length: 100’• Working (Maximum) Pressure: 4,400 PSI• Burst (Minimum): 11,000 PSI • Max. Fluid Temperature: 160º F.• Inlet: 1/4” MPT (Swivel)• Outlet: 1/4” MPT (Solid)• Weight 6.5 lbs