• Jetter Valve• Turn a General Pump into a Sewer Jetting machine the inexpensive way!• Use with General Pump EZ series pumps• Generates flow pulsations on demand to improve nozzle movement and cleaning power in sewer cleaning applications • Simple operation allows both full-flow and pulsation modes • Large, easy to grasp handle • Easy installation, replace middle inlet valve cap and valve • Maximum Pressure: 5,000 PSI• Weight: 0.5 lbs
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
Features• Forward jet breaks up clogs & debris• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line• Corrosion resistant stainless steel construction
Specifications • Inlet: 1/4” FPT• Nozzle Size: # 4.5• Material: Stainless steel• Maximum Pressure: 4,200 PSI• Max. Fluid Temperature: 300º F• Weight: 0.6 oz.
Please use Nozzle Chart to determine proper nozzle size
Nozzle Chart
Features:• Suitable for cold and hot water commercial pressure cleaning applications• Reinforcement: One layer of high tensile braided steel – R1 Rating• Cover: Wrapped finish with embossed lay line in grey “mark-less” cover color• Burst (Minimum): 3:1 working pressure • Impulse Life: 200,000+
Specifications: • Hose Inner Diameter: 3/8" ID• Length: 4’• Working (Maximum): Up to 4,000 PSI• Burst (Minimum): 12,000 PSI• Color: Grey, “mark-less”• Maximum Temperature: 250° F.• Ends: 3/8" MPT (1 solid & 1 swivel)• Weight 1.25 lbs
4,000 PSI 4.0 GPM General EZ4040G Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box PUMP:• General EZ4040G Pump with SAE J609 Gas Flange• Direct Drive with Gas Flange 9.0-13.0 HP SAE • Max. Volume: 4.0 GPM• Max. Discharge Pressure: 4,000 PSI • Max. Pump Speed: 3,400 RPM• Shaft Diameter: 1” Hollow• Max. Horsepower Requirements: 14.5 GHP • Max. Fluid Temp.: 165º F• Forged brass head & valve covers• Solid ceramic plungers COMPONENTS: • General EZ4040G Triplex Plunger Pump• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM • Thermal relief valve• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port• 3/8” QC brass socket Installed and 3/8” QC Plug Included• Mounting bolts• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted • Weight: 23.50 lb