Valley Industries

• Black Polypropylene Hose Barb - 90° Elbow
• Male NPT x hose barb

• Black Polypropylene Close Pipe Nipple
• Male NPT

Specifications:
• Investment Cast Body and Cap
• Teflon® seals and seats for smooth operation and proper seating characteristics
• Rating (W.O.G.): 600 PSI (100 PSI steam)
• Operating Temperature: -40º to 366º F
• Adjustable stem packing
• Blow-out proof stem
• Chrome plated brass ball
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 3.3 oz

Comet 1/4" FPT High Pressure Ball Valve 7,250 PSI

Specifications:
• Zinc plated steel body
• Chrome plated steel ball
• Max Pressure: 7,250 PSI
• Max Temperature: 212º F
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Replaces BV-14FF
• Weight: 1.10 lbs

Polypropylene 1/4" HB x 1/4" HB Hose Mender with Center Stop

Features:
• Polypropylene fittings are generally acceptable for use at working pressures up to 150 PSI at ambient temperatures
• Polypropylene is resistant to a broad range of chemicals including most agricultural chemicals, acid based fertilizers, ammonium compounds, calcium carbonate, ethanol, hydrochloric acid, magnesium sulfate, oxalic acid, proprionic acid, phosphoric acid and sodium compounds

Specifications:
• Black Polypropylene Hose Mender
• Hose Barb x Hose Barb

Valley 1/4" Mini Chrome-Brass Ball Valve F x F, Lever Handle

Specifications:
• Chromed brass body, ball & stem
• Teflon® seat & Viton® seals
• Nylon lever handle
• Rating (CWP): 200 PSI
• Operating Temperature: -4º to 250º F
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 3.5 oz

Specifications:
• Chromed brass body, ball & stem
• Teflon® seat & Viton® seals
• Nylon butterfly t-handle
• Rating (CWP): 200 PSI
• Operating Temperature: -4º to 250º F
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 3.6 oz

Specifications:
• Chromed brass body, ball & stem
• Teflon® seat & Viton® seals
• Nylon lever handle
• Rating (CWP): 200 PSI
• Operating Temperature: -4º to 250º F
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Male NPT
• Weight: 3.5 oz

Specifications:
• Chromed brass body, ball & stem
• Teflon® seat & Viton® seals
• Nylon butterfly t-handle
• Rating (CWP): 200 PSI
• Operating Temperature: -4º to 250º F
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Male NPT
• Weight: 3.4 oz

Polypropylene 1/4" MPT x 1/4" FPT Street Elbow

Features:
• Polypropylene fittings are generally acceptable for use at working pressures up to 150 PSI at ambient temperatures
• Polypropylene is resistant to a broad range of chemicals including most agricultural chemicals, acid based fertilizers, ammonium compounds, calcium carbonate, ethanol, hydrochloric acid, magnesium sulfate, oxalic acid, proprionic acid, phosphoric acid and sodium compounds

Specifications:
• Black Polypropylene Street Elbow
• Male NPT x Female NPT

Specifications:
• Investment Cast Body and Cap
• Teflon® seals and seats for smooth operation and proper seating characteristics
• Rating (W.O.G.): 1,000 PSI
• Operating Temperature: -60º to 450º F
• Adjustable stem packing
• Blow-out proof stem and ball are made of 316 stainless steel
• Locking device on handle
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 6.8 oz

Specifications:
• Investment Cast Body and Cap
• Teflon® seals and seats for smooth operation and proper seating characteristics
• Rating (W.O.G.): 2,000 PSI
• Operating Temperature: -60º to 450º F
• Adjustable stem packing
• Blow-out proof stem and ball are made of 316 stainless steel
• Locking device on handle
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 9.7 oz

• Black Polypropylene Hose Barb
• Male NPT x hose barb

Valley Industries 10' Wire Harness With Battery Clamps

Specifications:
• Clamps Connect to Mower or ATV Battery
• 10’ of 16 Gauge Wire
• On/Off Switch Remote
• 2 Pin Connector
• Weight: 0.50 lbs.

Valley Industries 10" Polyurethane Filled Tire & Wheel 410/350-4 5/8" ID 2-1/4 Offset Hub

FEATURES:
• Size: 410/350-4
• Thread: 2-ply with 'Turf Tread
• Bearing ID: 5/8"
• Ball Bearing: Steel
• Rim Size: 4" Diameter
• Tread Width: 2-5/8"
• Hub Width: 2-1/4"
• Weight: 3.20 lbs

Valley Industries Series 40 Dual Scale Industrial 10,000 PSI Bottom Mount 2-1/2" SS Pressure Gauge. These gauges are designed for use with any medium not corrosive to brass or bronze. Liquid-filled gauges are recommended for reducing shock caused by pressure fluctuations or vibration

Features:
• Dial Range (PSI): 0 – 10,000
• Dial Range (BAR): 0 – 700
• Casing: 2 1/2" Diameter
• Movement: Brass
• Bourdon Tube: Helical in phosphor bronze
• Pointer: Black enameled aluminum
• Dial: White aluminum
• Window: Polycarbonate – temperature compensating
• Case Material: 304 Stainless steel
• Mounting: Bottom
• Connection Material: Brass
• Connection Size: 1/4" MNPT
• Fill Material: Glycerin (liquid)
• Wetted Parts: Copper alloy
• Weight: 0.50 lbs.

Valley Industries Series 24 Single Scale General Service 100 PSI Back Mount 2" ABS Dry Pressure Gauge. These gauges are designed for use with gas, oil, and water or any medium not corrosive to brass or bronze

Features:
• Dial Range: 0 – 100 PSI
• Casing: 2" Diameter
• Movement: Brass
• Bourdon Tube: C-Shaped in copper alloy
• Pointer: Black enameled aluminum
• Dial: White aluminum
• Window: Acrylic
• Case Material: ABS
• Mounting: Back
• Connection Material: Brass
• Connection Size: 1/4" MNPT
• Accuracy: ASME/ANSI B40.1 Grade B (3- 2-3%)
• Fill Material: Dry only
• Wetted Parts: Copper alloy
• Weight: 0.15 lbs.

Valley Industries Series 40 Dual Scale Industrial 100 PSI Back Mount 4" SS Pressure Gauge. These gauges are designed for use with any medium not corrosive to brass or bronze. Liquid-filled gauges are recommended for reducing shock caused by pressure fluctuations or vibration

Features:
• Dial Range (PSI): 0 – 100
• Dial Range (BAR): 0 – 7
• Casing: 4" Diameter
• Movement: Brass
• Bourdon Tube: C-Shaped in copper alloy
• Pointer: Black enameled aluminum
• Dial: White aluminum
• Window: Polycarbonate – temperature compensating
• Case Material: 304 Stainless steel
• Mounting: Back
• Connection Material: Brass
• Connection Size: 1/4" MNPT
• Fill Material: Glycerin (liquid)
• Wetted Parts: Copper alloy
• Weight: 0.75 lbs.