Valley Industries

Specifications
• Max. Capacity: 2,000 Lbs
• Lift Travel: 13.5”
• Length Retracted: 21.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Top wind
• Mount Type: A- Frame, 3 hole flange
• Mount Height: 7.0”
• Ground Support: Optional foot plate & wheels shown below
• Grease Fitting: Yes
• Weight: 9.5 Lbs

Specifications
• Max. Capacity: 2,000 Lbs
• Lift Travel: 10”
• Length Retracted: 18.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Top wind
• Mount Type: Weld on flange kit (Flange, pin, spring & clip)
• Mount Height: 11.0”
• Ground Support: 7.6” x 3.8” Foot plate
• Grease Fitting: Yes
• Weight: 13.0 Lbs

FEATURES:
• Inlet Connection: 3/8 Hose barb
• Overall Length: 30”
• Plastic valve body with filter in handle
• Chromed aluminum extension is 19” long with a 30° offset tip
• # 18 Tip has adjusting pattern from cone spray to straight stream
• Trigger locks for continuous operation
• Weight: 0.30 lbs

Valley Industries SG-2218-18 pistol grip spot gun with adjustable nozzle tip. Works on ATV, Spot and Trailer sprayers with a 3/8 hose barb inlet. Features a special ergonomic design that helps you spray for long periods of time without the effects of fatigue

FEATURES:
• Ergonomic pistol grip handle
• Brass valve
• Max. pressure: 362 PSI
• Max. Flow: 8 GPM
• Inlet Connection: 3/8 Hose barb
• # 18 Tip has adjusting pattern from cone spray to straight stream
• Trigger locks for continuous operation
• Aluminum wand is 18”
• Overall Length: 26.7”
• Weight: 0.55 lbs

FEATURES:
• Ergonomic pistol grip handle
• Brass valve
• Max. pressure: 300 PSI
• Max. Flow: 7 GPM
• Inlet Connection: 3/8 Hose barb
• # 24 Tip has adjusting pattern from cone spray to straight stream
• Weight: 0.90 lbs

Valley Industries SG-2200 16" Long Range Misting Spray Gun 400 PSI 9 GPM. Reach new heights with the Valley Industries Universal Long Range Mist Spray Gun

Features:
• Easily handle up to 400 PSI and 9 GPM with this ergonomic one-handed spray gun
• With just a twist of the nozzle, change from a steady stream to a fine atomized mist spray pattern
• Prevent unwanted chemical drips with the include no-drip shut-off at end of spray nozzle
• Features a trigger lock for to reduce fatigue and increase operator comfort
• Spray up to 45 feet depending on the spraying equipment used
• Designed to be field repairable to minimize unnecessary downtime
• Includes a 3/8” hose barb connection for easy attachment to spot spraying hose
• Not for use with pressure washers

Application:
• Orchards
• Vineyards
• Livestock
• Nurseries & Tall Trees

Specifications:
• Max Pressure: 400 PSI
• Max Flow: 9 GPM
• Overall length: 16” (without hose barb)
• Connection: 3/8" Male hose barb
• Vertical Spray: 35’
• Horizontal Spray: 45’
• Nozzle: 1.8 MM orifice for 1.0-2.2 GPM pumps ( Others sizes available)
• Weighs 1.55 lbs

Specifications:
• Investment Cast Body and Cap
• Teflon® seals and seats for smooth operation and proper seating characteristics
• Rating (W.O.G.): 1,000 PSI
• Operating Temperature: -60º to 450º F
• Adjustable stem packing
• Blow-out proof stem and ball are made of 316 stainless steel
• Locking device on handle
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Female NPT

• Inlet Washer with Cone Filter 304SS 50/60 Mesh
• For 3/4 FGH garden hose inlet connectors
• Replaces AR7369

Valley Industries Garden Hose Adapter with Cone Filter

Specifications:
• Stainless steel GHT tension spring on garden hose adapter
• Material: Brass
• 50 Mesh cone filter
• Inlet: Female garden hose (FGH)
• Replaces: AR7300
• Outlet: 1/2" Male

Polypropylene 3/4" MPT x 1/2" FPT Hex Head Bushing.

Features:
• Polypropylene fittings are generally acceptable for use at working pressures up to 150 PSI at ambient temperatures
• Polypropylene is resistant to a broad range of chemicals including most agricultural chemicals, acid based fertilizers, ammonium compounds, calcium carbonate, ethanol, hydrochloric acid, magnesium sulfate, oxalic acid, proprionic acid, phosphoric acid and sodium compounds

Specifications:
• Black Polypropylene Hexagon Head Bushing
• Male NPT x Female NPT

Specifications:
• Chromed brass body, ball & stem
• Teflon® seat & Viton® seals
• Nylon butterfly t-handle
• Rating (CWP): 200 PSI
• Operating Temperature: -4º to 250º F
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Male NPT
• Weight: 3.4 oz

Specifications:
• Chromed brass body, ball & stem
• Teflon® seat & Viton® seals
• Nylon butterfly t-handle
• Rating (CWP): 200 PSI
• Operating Temperature: -4º to 250º F
• Inlet: 3/8" Female NPT
• Outlet: 3/8" Female NPT
• Weight: 3.5 oz

Specifications:
• Chromed brass body, ball & stem
• Teflon® seat & Viton® seals
• Nylon butterfly t-handle
• Rating (CWP): 200 PSI
• Operating Temperature: -4º to 250º F
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 3.6 oz

Specifications:
• Size: 048
• Min. Clamp Dia.: 2-1/2”, 65mm
• Max. Clamp Dia.: 3-1/2”, 89mm
• Band Width: 1/2”
• Band, Housing & Screw: Series 300 Stainless Steel
• Weight: 1.0 oz

Specifications:
• Size: 040
• Min. Clamp Dia.: 2”, 52mm
• Max. Clamp Dia.: 3”, 76mm
• Band Width: 1/2”
• Band, Housing & Screw: Series 300 Stainless Steel
• Weight: 0.9 oz

Specifications:
• Size: 032
• Min. Clamp Dia.: 1-1/2”, 38mm
• Max. Clamp Dia.: 2-1/2”, 63mm
• Band Width: 1/2”
• Band, Housing & Screw: Series 300 Stainless Steel
• Weight: 0.9 oz

• Black Polypropylene Hose Barb - 90° Elbow
• Male NPT inlet x hose barb outlet