Suttner America

Suttner ST-2605F Relax-Action Foam Spray Gun 12 GPM and 5,000 PSI

Features
• Suttner exclusive relax-action trigger
• Easiest opening and holding trigger in it’s class
• Proper spray angle for optimal positioning of pressure points
• Orange trigger lock identifies foam spray gun
• Comfort design trigger system

Specifications
• Max Flow: 12.0 GPM
• Max Pressure: 5,000 PSI
• Max Temp: 100° F.
• Inlet: 3/8" FPT
• Outlet: 1/4" FPT
• Weight: 1.28 lb

Features:
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.34 lbs

Features:
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 1,000 PSI
• Minimum Pressure: 200 PSI
• Flow Rate: 8 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.34 lbs

Features:
• Built-in exclusive down stream (venturi-type) injector with built in orifice provides more precise siphon rate.
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Orifice: 1.8 mm
• Injector Flow Rate: 1.5 - 2.25 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.38 lbs

Features:
• Built-in exclusive down stream (venturi-type) injector with built in orifice provides more precise siphon rate.
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Orifice: 2.1 mm
• Injector Flow Rate: 2.25 – 3.35 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.38 lbs

Features:
• Built-in exclusive down stream (venturi-type) injector with built in orifice provides more precise siphon rate.
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Orifice: 2.4 mm
• Injector Flow Rate: 3.35 – 5.0 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.38 lbs

Features:
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Normally closed bypass
• Amps: 125 VAC 5A, 240 VAC 3A
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.86 lbs

Features:
• Built-in exclusive down stream (venturi-type) injector with built in orifice provides more precise siphon rate
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Orifice: 1.8 mm
• Injector Flow Rate: 1.5 - 2.25 GPM
• Normally closed bypass
• Amps: 125 VAC 5A, 240 VAC 3A
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.86 lbs

Features:
• Built-in exclusive down stream (venturi-type) injector with built in orifice provides more precise siphon rate
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Orifice: 2.1 mm
• Injector Flow Rate: 2.25 - 3.25 GPM
• Normally closed bypass
• Amps: 125 VAC 5A, 240 VAC 3A
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.86 lbs

Features:
• Built-in exclusive down stream (venturi-type) injector with built in orifice provides more precise siphon rate
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Orifice: 2.4 mm
• Injector Flow Rate: 3.35 – 5.0 GPM
• Normally closed bypass
• Amps: 125 VAC 5A, 240 VAC 3A
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.86 lbs

Features:
• Only tamper-resistant operator adjustable valve in the industry which allows limit setting on both maximum pressure and minimum pressure
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.34 lbs

Features
• High Quality, German engineered components
• The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to usual competitors spray gun
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Easiest opening and holding trigger in its class
• Proper spray angle for optimal positioning of pressure points
• Forged brass housing for maximum strength

Specifications
• Max Pressure: 1,800 PSI
• Max Flow: 21.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.30 lb

Suttner ST-2620F Relax-Action High Volume Foam Spray Gun 18 GPM and 4,000 PSI

Features
• Relax-Action™ trigger, German Engineered Technology reduces trigger pulling force up to 40% and holding force up to 90%
• For high volume, low pressure machines
• Proper spray angle for optimal positioning of pressure points
• Orange trigger lock identifies foam spray gun

Specifications
• Max Flow: 18.0 GPM
• Max Pressure: 4,000 PSI
• Max Temp: 100° F.
• Inlet: 3/8" FPT
• Outlet: 1/4" FPT
• Weight: 1.30 lb

Suttner ST-2635 Relax-Action Industrial Spray Gun 6,000 PSI 9.2 GPM with Carbide Ball & Stainless Steel Inlet. The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to standard spray guns

Features
• Stainless Steel inlet
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Easiest opening and holding trigger in its class
• Wear resistant carbide ball
• Forged brass housing for maximum strength
• Proper spray angle for optimal positioning of pressure points

Specifications
• Max Pressure: 6,000 PSI
• Max Flow: 9.2 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female
• Outlet: 1/4" FPT
• Weight: 1.30 lb

Suttner ST-265 Pressure Compensating Unloader Valve 5,070 PSI.

Features:
• Soft switching behavior
• Fatigue-free spring
• Particularly easy to maintain
• Low pressure drop
• Valve elements made of high-grade stainless steel and ceramic

Flyer

Specifications:
• Pressure:1,000 - 5,070 PSI
• Flow Rate: 13 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FPT
• Outlet Port: 3/8” FPT
• Bypass Ports (2): 3/8” FPT
• Weight: 2.10 lbs

Suttner ST-265 Pressure Compensating Unloader Valve 5,070 PSI with Switch.

Features:
• Soft switching behavior
• Fatigue-free spring
• Particularly easy to maintain
• Low pressure drop
• Valve elements made of high-grade stainless steel and ceramic

Flyer

Specifications:
• Pressure:1,000 - 5,070 PSI
• Flow Rate: 13 GPM
• Max Temperature: 176° F
• Maximum inrush current 10mA-5A(2A)
• VoItage: 12-24VDC 12-250VAC
• Protection CIass: IP65
• CabIe:1.2 meters 3xAWG20
• Inlet Port: 3/8" FPT
• Outlet Port: 3/8” FPT
• Bypass Ports (2): 3/8” FPT
• Weight: 2.25 lbs

Features
• High Quality, German engineered components
• The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to usual competitors spray gun
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Stainless steel components
• 303 Stainless Steel Housing
• Easiest opening and holding trigger in its class
• Proper spray angle for optimal positioning of pressure points
• Food Grade

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.24 lb

Features
• High Quality, German engineered components
• The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to usual competitors spray gun
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Stainless Steel Housing
• Ceramic ball together with a seal kit made out of stainless steel
• Food Grade

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.25 lb

Features
• High Quality, German engineered components
• The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to usual competitors spray gun
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Stainless Steel Housing
• Stainless steel valve components
• Easiest opening and holding trigger in its class
• Proper spray angle for optimal positioning of pressure points

Specifications
• Max Pressure: 1,800 PSI
• Max Flow: 21.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.25 lb

Suttner ST-275 Stainless Steel Unloader Valve 7,250 PSI 10.5 GPM 3/8”F x 1/2" F. Stainless steel design. Particularly durable

Features:
• Smooth switching behavior
• All media-contacting parts made of stainless steel
• Pressure reduction in hose and gun in bypass operation to below 40% of the working pressure
• The sealing system does not require any moving high-pressure soft seals and is characterized by a particularly long service life
• High pressure connections suitable for sealing with bonded seals
• Valve ball made of high-performance ceramic

Flyer

Specifications:
• Max Pressure: 7,250 PSI
• Flow Rate: 10.5 GPM
• Max Temperature: 194° F
• Inlet Port: 3/8" F
• Outlet Port: 1/2” F
• Bypass Port: 3/8” F
• Weight: 2.73 lbs