Suttner America

Suttner #9.0 ST-160.3A Air Assisted Stainless Steel Chemical Injector with 3 Pairs of Injectors & Nozzles. Injector for large water quantities and high dosages. Chemically resistant stainless steel 1.4305 / AISI 304 with compressed air connection and wall bracket

Features
• The stainless steel injector features three pairs of injector and nozzle in one housing which can be configured independently. This enables numerous metering and foam applications
• In order to produce large foam quantities in the low-pressure range, the injector is provided with an compressed air connection
• You can inject 3 of the same or three different cleaning agents at the same time
• Maximum draw rate per line is 7 – 8%
• Total injector draw rate will be 21% – 24%
• Each injector draw barb comes with a packet of dosing nozzles if you want to meter some of or all 3 draw lines

Specifications
• Nozzle/Orifice Size: 9.0
• Flow Rate: 1 - 24 GPM
• Pressure: 90 - 5,000 PSI
• Max Temp: 194° F.
• Inlet: 1/2” Female
• Outlet: 1/2” Female
• Air Connection: 1/4” Male
• Hose Barbs: .35” ID hose
• Note: Optimum foam created 130°F or less
• Weight: 3.55 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner #9.0 ST-160.3A Extreme Air Assisted Stainless Steel Chemical Injector with 3 Pairs of Injectors & Nozzles. Injector for large water quantities and high dosages. Chemically resistant stainless steel 1.4305 / AISI 304 with compressed air connection and wall bracket

Features
• Extreme chemical injectors for PH Level 2.0 or below
• The stainless steel injector features three pairs of injector and nozzle in one housing which can be configured independently. This enables numerous metering and foam applications
• In order to produce large foam quantities in the low-pressure range, the injector is provided with an compressed air connection
• You can inject 3 of the same or three different cleaning agents at the same time
• Maximum draw rate per line is 7 – 8%
• Total injector draw rate will be 21% – 24%
• Each injector draw barb comes with a packet of dosing nozzles if you want to meter some of or all 3 draw lines

Specifications
• Nozzle/Orifice Size: 9.0
• Flow Rate: 1 - 24 GPM
• Pressure: 90 - 5,000 PSI
• Max Temp: 194° F.
• Inlet: 1/2” Female
• Outlet: 1/2” Female
• Air Connection: 1/4” Male
• Hose Barbs: .35” ID hose
• Note: Optimum foam created 130°F or less
• Weight: 3.55 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner #4.5 ST-160.3A Extreme Air Assisted Stainless Steel Chemical Injector with 3 Pairs of Injectors & Nozzles. Injector for large water quantities and high dosages. Chemically resistant stainless steel 1.4305 / AISI 304 with compressed air connection and wall bracket

Features
• Extreme chemical injectors for PH Level 2.0 or below
• The stainless steel injector features three pairs of injector and nozzle in one housing which can be configured independently. This enables numerous metering and foam applications
• In order to produce large foam quantities in the low-pressure range, the injector is provided with an compressed air connection
• You can inject 3 of the same or three different cleaning agents at the same time
• Maximum draw rate per line is 7 – 8%
• Total injector draw rate will be 21% – 24%
• Each injector draw barb comes with a packet of dosing nozzles if you want to meter some of or all 3 draw lines

Specifications
• Nozzle/Orifice Size: 4.5
• Flow Rate: 1 - 24 GPM
• Pressure: 90 - 5,000 PSI
• Max Temp: 194° F.
• Inlet: 1/2” Female
• Outlet: 1/2” Female
• Air Connection: 1/4” Male
• Hose Barbs: .35” ID hose
• Note: Optimum foam created 130°F or less
• Weight: 3.55 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #10.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 10.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #11.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 11.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #12.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 12.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #12.5, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 12.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #3.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 3.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #3.5, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 3.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #4.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Orifice: 4.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #4.5, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 4.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #5.5, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 5.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #6.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 6.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #7.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 7.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #8.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 8.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #8.5, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 8.5
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #9.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Nozzle/Orifice Size: 9.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-160M System Diagram below to determine the foam components needed

ST-160M System Diagram

Suttner ST-161 Stainless Steel Metering Valve, 212° F .35" Hose Barb. Eliminate the need for dosing nozzles

Specifications
• Fits Injectors ST-160, ST-160.2, ST-167, ST-168
• Adjustable
• Stainless steel
• Food grade construction
• Weight: 1.75 lb

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #10.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 10.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram

Suttner ST-164 Stainless Steel Chemical Bypass Injector, #11.0, 5000 Psi, 3/8" F x 1/2” F

Field of Application
• Designed for the cleaning of vehicles carrying cattle, food, frozen foods and fish in order to avoid bacterial spread. Also suitable for cleaning milking parlours and applicable in cattle bredding, piggery, poultry farming and in the pisciculture
• The foam device is a combination made out of stainless steel and special high performance plastics. The addition of one out of two connected chemicals is determined by positioning the lever. All versions are suitable for the addition in low pressure from approx. 43 PSI up to max. 5,076 PSI
• When being operated in rinsing function up to 15.85 GPM pass through the unit without any drop in pressure
• Locks in position for accurate metering
• In combination with a foam lance (ST-72 or ST-75), an adjustable or a triple nozzle the ST-164 injector can suck in chemicals by means of the integrated check valve made out of stainless steel and spray them on or foam them depending on the chosen nozzle
• The ST-164 injector is available in the nozzle size of 3.5 – 11.0
• The dosing is adjusted by one of the 18 nozzle inserts which are included in the consignment. The connection for chemicals is equipped with an integrated check valve

Features
• Integrated lever that allows you to go from disinfectant to foam to rinse
• Food grade quality and specifications
• Durable Stainless steel construction
• 18 Dosing nozzles included
• Use 0.35 ID hose

Specifications
• Nozzle/Orifice Size: 11.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,200 PSI
• Max Temp: 212° F.
• Inlet: 3/8” Female
• Outlet: 1/2” Female
• Hose Barbs: .35” ID hose
• Weight: 4.80 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

See the ST-164 System Diagram below to determine the foam components needed

ST-164 System Diagram