Suttner America

Suttner Stainless Steel Hose Hanger, Holds 120' of 1/2" hose. This food grade hose hanger is ideal for mounting to any vertical wall

Specifications:
• Polished stainless steel
• Food Grade
• Holds 175 ft of 3/8” hose
• Holds 120 ft of 1/2” hose
• Holds 90 ft of 3/4” hose
• Dimensions: 14-1/4” x 6-5/16” x 7-3/4”
• Weight: 2.0 lbs.

Suttner #15 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #15 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner #19.5 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #19.5 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner #30 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #30 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart

Suttner #9 ST-176 Stainless Steel 27.5” Foam Blaster Lance 3,625 PSI with 1/4" F Inlet. Switch from foam to rinse by turning the valve that’s conveniently within hands reach

Features
• The ST-176 Foam Blaster lance is the ideal accessory for Suttner's foam injector line. The innovative change-over technology allows to direct the full flow into either one or the other outlet pipe just by turning the hand wheel at the inlet
• In one position of the hand wheel the flow is directed thru an ST-76 foam blaster head for foaming. After changing over the full flow is directed thru the other pipe
• Includes 3 Injector nozzles
• Wash or rinse nozzle sold separately

Specifications
• Flow Rate: 6.0 – 16.0 GPM
• Max Pressure: 3,625 PSI
• Overall Length: ”
• Max Temp: 212° F.
• Inlet: 1/4" Female NPT
• Outlet (Foam): #9 ST-76 Foam Blaster head
• Outlet (Rinse): 1/4" Male (Nozzle not included)
• Note: Suttner (ST-160, ST-160M or St-164 Chemical or Foam injector) and rinse/wash nozzle required and are not included
• Weight: 3.45 lb

Please use Nozzle Chart to determine proper spray nozzle size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Air Injector Nozzle to use

Foam Nozzle Chart