MTM Hydro

Specifications
• Fits all standard 3/8" quick couplers
• Material: Viton
• Max. Temperature: 300° F
• Color: Brown QCO2V-100 PACK
• Quantity: 100

NEW MTM Hydro 14.7022 PF22.2 Professional Foam Cannon Adjustable Air Intake and Fan with New Bottle Design Stands Up On Its Own. The MTM Hydro Foam Cannon offers not only adjustable fan blades but now offers an adjustable spray pattern (vertically or horizontally) as it throws thick foam onto your vehicle, house, fence, sidewalk, roof or other washable items. The chemical injection knob on top allows for more or less chemical to be drawn through the internal chamber, increasing or decreasing the foam output. This allows the internal agitator to create a dense foam

Features:
• Adjustable Spray Pattern (horizontal or vertical)
• Adjustable Fan Blades (jet-wide)
• Adjustable chemical injection knob
• Single cast plated brass body
• New stand up bottle
• Replaceable filter
• M22 and QC plug fittings included
• Approved For auto, RV, marine detailing agriculture and home cleaning

Note:
• The 1.1mm (3.0) nozzle will accommodate a variety of pressure washers typically in the lower GPM/PSI spectrum. The 1.1mm orifice will fit most residential pressure washers much more accurately than the installed 1.25mm (3.5) orifice and provide better foam from your MTM Foam Cannon
• The full spectrum of ratings are not supported by the 3.5 or 3.0 orifices included with this kit
• Other orifices may be required for higher flow machines that have lower PSI- Example: 2000 PSI with 3.5 GPM requires a 5.0 Orifice
• For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of bypass
• You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine
• MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice
• Additional orifice sizes and replacement items available for purchase

Specifications:
• Min. Flow Rate: 1.4 GPM
• Max. Flow Rate: 5.3 GPM
• Min. Pressure: 1,100 PSI
• Max. Pressure: 5,000 PSI
• Max. Temp.: 140°
• Nozzle Size: #3.5 / 1.25mm (Installed), #3.0 / 1.10mm included
• 32oz Grey stand up bottle
• Fitting pack (2-peices) containing a 1/4" M22 adaptor and 1/4" QC Plated Steel Plug
• Weight: 1.10 lbs.

MTM Hydro 20.0039 3/8" Stainless Steel Ball Valve 6,000 PSI. MTM Hydro's Stainless Steel Ball Valves are a great solution for High Pressure and Chemical environments

Features
• Stainless steel ball valves are commonly installed in in agricultural and food production environments that use corrosive cleaning agents and require equipment that will last
• By shutting the water off, the user can then change over to another gun set up without turning the entire system off
• These models are typically seen at ceiling shutoff locations, at the base of the spray gun, or along wall mounted systems to open and close additional lines

Injector Specifications:
• Max Pressure: 6,000 PSI
• Max Temperature: 176° F
• Inlet: 3/8" Female
• Outlet: 3/8" Female
• Body Material: Stainless Steel
• Weight: 1.04 lb