MTM Hydro

MTM Hydro 44.5581 Ultimate Shine Tire Dressing 16oz. Our tire shine is designed to be applied with our “puck” applicator or mechanically through brushes, foam pads or cloth. Due to its unique blend of silicones this tire dressing reduces "sling" while creating high gloss with minimal product usage. Allow time for tire shine to cure before driving. Dry time may vary based on volume of usage and ambient temperature

How To:
• Apply a thin layer of product to clean / dry tire
• Use an MTM “puck” applicator to smooth out the application. Or for extra high gloss, apply tire shine without wiping
• Please be sure to allow for adequate dry time to avoid “sling”
• Caution: Application area may be slippery during and after use if not cleaned up

Specifications
• Proudly Made In The USA
• Bottle Size: 16 oz
• Weight: 1.10 lbs

MTM Hydro 24.0100 Brass Top Mount Pressure Gauge Quick Disconnect Fitting

MTM Hydro's Brass Pressure Gauge Fitting with Port is meant to be paired with a 1/4” bottom-mount pressure gauge (Not included). With 3/8" Quick Couplers on both ends, this tool can quickly be relocated anywhere in your pressurized line to measure baseline and performance pressure

Specifications
• Material: Brass & stainless steel
• Gauge Port: 1/4” Female
• Max. Pressure: 2,700 PSI
• Wight: 0.31 lbs

Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction

Specifications
• Inlet: 3/8” FPT
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 1.4 oz.

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

MTM Hydro 24” pressure washer zinc plated extension wand with 22mm-14 male twist connect inlet & 1/4” QC socket outlet

Specifications
• Length: 24"
• Pipe: 1/4” Zinc plated steel
• Inlet: 22mm-14 Male twist connect
• Outlet: 1/4" Female Quick Connect Socket
• Max Pressure: 4,100 PSI
• Max Flow: 10.5 GPM
• Max Temp: 300° F.
• Weight 1.25 lbs

MTM Hydro 24.0101 Stainless Top Mount Pressure Gauge Quick Disconnect Fitting

MTM Hydro's Stainless Pressure Gauge Fitting with Port is meant to be paired with a 1/4” bottom-mount pressure gauge (Not included). With 3/8" Quick Couplers on both ends, this tool can quickly be relocated anywhere in your pressurized line to measure baseline and performance pressure

Specifications
• Material: Stainless steel
• Gauge Port: 1/4” Female
• Max. Pressure: 6,000 PSI
• Wight: 0.31 lbs

• MTM PF22 Foamer Repair Kit – Filter, Pin & O-Rings
• Works with MTM # 14.5001

Features
• Rotating nozzle adds more agitation, which increase cleaning & flushing action
• 3 Backward jets spin nozzle and drive forward
• Corrosion resistant stainless steel and brass construction

Specifications
• Inlet: 1/8” FPT
• Nozzle Size: # 5.5
• Material: Stainless steel & brass
• Maximum Pressure: 4,000 PSI
• Max. Fluid Temperature: 300º F
• Weight: 1.3 oz.

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

The all new MTM Hydro 24.5004 15mm Twist Plug adapter offers you a consolidated option to adapt to proprietary M22 fittings that, previously kept you from upgrading the stock guns provided by the manufacturer

Standard pressure washers will have a 14mm stem required, however, in the image provided you can see the enlarged stem receiver. Some manufacturers have changed to 15mm to prevent you from upgrading through the use of aftermarket accessories, until now!

This premium adapter has been quality tested and certified by MTM Hydro to fit a variety of hose outlets including select popular models of Sunjoe, Ryobi, AR Blue Clean consumer units, and Greenworks so that you can, now, upgrade your guns and lance setups to MTM Hydro’s Italian SG series. Keep in mind, you could also upgrade your entire setup to Kobrajet hose with the use of the 24.5005 fitting for these same residential pressure washers

Specifications
• 3/8" QC socket
• Male M22, Yoke/Stem: 15MM
• 4,000 PSI max. pressure
• Wight: 0.25 lbs

Features
• Rotating nozzle adds more agitation, which increase cleaning & flushing action
• 3 Backward jets spin nozzle and drive forward
• Corrosion resistant stainless steel and brass construction

Specifications
• Inlet: 1/8” FPT
• Nozzle Size: # 4.5
• Material: Stainless steel & brass
• Maximum Pressure: 4,000 PSI
• Max. Fluid Temperature: 300º F
• Weight: 1.3 oz.

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Specifications
• Fits all standard 1/4" quick couplers
• Material: Viton
• Max. Temperature: 300° F
• Color: Brown
• Replaces QCO1V-25 Pack
• Quantity: 25

Specifications
• Fits all standard 3/8" quick couplers
• Material: Viton
• Max. Temperature: 300° F
• Color: Brown QCO2V-25 PACK
• Quantity: 25

Specifications
• Fits all standard 1/4" quick couplers
• Material: Buna
• Max. Temperature: 210° F
• Color: Black
• Replaces QCO1B-100 Pack
• Quantity: 100

Specifications
• Fits all standard 3/8" quick couplers
• Material: Buna
• Max. Temperature: 210° F
• Color: Black QCO2B-100 PACK
• Quantity: 100

Features
• For use when high and low pressures are needed
• For example, spraying cleaning agents with low pressure through an injector valve and then cleaning with high pressure

Specifications
• Max Pressure: 4,000 PSI
• Max Flow: 8.0 GPM
• Max Temp: 195° F.
• Inlet: 1/4" Female NPT
• Outlets (2): 1/4" Female NPT
• Weight: 6.1 oz.
• Note: Requires one 1/4” MPT spray nozzle and one 1/4” MPT soap nozzle, which are not included

MTM Hydro 20.0032 3/8" Premium Plated Brass Ball Valve 3,000 PSI. MTM Hydro's High Pressure Plated Brass Ball valves are found in a variety of areas in the pressure washing system

Features
• Most commonly, this round-edged, light weight, heavy duty Italian ball valve is found at the base of the spray gun and used as a temporary shutoff while the pressure washer is on
• By shutting the water off, the user can then change over to another gun set up without turning the entire system off
• This specific series of Italian Ball Valve is a top 5 product of ours every month of the year which goes to show you that tens of thousands of people per year cannot be wrong about their choice of quality
• When installing NPT fittings in these BSP threads, be sure to wrap threads 6-7 times with Teflon tape or 2-3 drops of Loctite

Injector Specifications:
• Max Pressure: 3,000 PSI
• Max Temperature: 176° F
• Inlet: 3/8" Female BSP
• Outlet: 3/8" Female BSP
• Body Material: Plated brass
• Weight: 1.05 lb

Features:
• Combines Power and Performance with Comfort and Durability
• Unitized Valve
• Forged bronze body
• Glass-Filled nylon handle

Specifications:
• Max Pressure: 5,000 PSI
• Max Flow: 11.5 GPM
• Maximum Temperature: 300° F.
• Color: Black
• Inlet: 3/8" FPT
• Outlet: 1/4" FPT
• Weight 23 oz lbs

Specifications
• Fits all standard 1/4" quick couplers
• Material: Viton
• Max. Temperature: 300° F
• Color: Brown QCO1V-100 PACK
• Quantity: 100

MTM Hydro 20.0033 1/2" Premium Plated Brass Ball Valve 3,000 PSI. MTM Hydro's High Pressure Plated Brass Ball valves are found in a variety of areas in the pressure washing system

Features
• Most commonly, this round-edged, light weight, heavy duty Italian ball valve is found at the base of the spray gun and used as a temporary shutoff while the pressure washer is on
• By shutting the water off, the user can then change over to another gun set up without turning the entire system off
• This specific series of Italian Ball Valve is a top 5 product of ours every month of the year which goes to show you that tens of thousands of people per year cannot be wrong about their choice of quality
• When installing NPT fittings in these BSP threads, be sure to wrap threads 6-7 times with Teflon tape or 2-3 drops of Loctite

Injector Specifications:
• Max Pressure: 3,000 PSI
• Max Temperature: 176° F
• Inlet: 1/2" Female BSP
• Outlet: 1/2" Female BSP
• Body Material: Plated brass
• Weight: 1.45 lb

MTM Hydro 20.0038 1/4" Stainless Steel Ball Valve 6,000 PSI. MTM Hydro's Stainless Steel Ball Valves are a great solution for High Pressure and Chemical environments

Features
• Stainless steel ball valves are commonly installed in in agricultural and food production environments that use corrosive cleaning agents and require equipment that will last
• By shutting the water off, the user can then change over to another gun set up without turning the entire system off
• These models are typically seen at ceiling shutoff locations, at the base of the spray gun, or along wall mounted systems to open and close additional lines

Injector Specifications:
• Max Pressure: 6,000 PSI
• Max Temperature: 176° F
• Inlet: 1/4" Female
• Outlet: 1/4" Female
• Body Material: Stainless Steel
• Weight: 0.65 lb